Topic

Rusty pot

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedMar 24, 2010 at 6:30 am

I had an evernew 900 pot with 2 gas canisters stored for a couple of weeks and when I arrived in the Smokys this past weekend I noticed rust rings from where the bases of the canisters had touched the sides of the pot.

Is contact between the two metals causing this? I didn't believe I had much water residue in here but it could have been from a lot of temperature changes.

Should the titanium be scoured and then this will be clean again?

Ben BPL Member
PostedMar 24, 2010 at 6:37 am

Titanium should not rust. It should just be rust from the canister and scouring will clean it up.
Wait for a second opinion though :)

PostedMar 24, 2010 at 8:10 am

the rust is from the fuel canister. it really doesn't take much moisture, especially if the canister has been scuffed up at all from the ground. you should have no problems with a little scouring of the titanium.

PostedMar 24, 2010 at 8:12 am

Happens nearly every time. Best to put a piece of fabric between the two to avoid rust rings.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...