Topic

Most efficient way to fill a Platypus?

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
Nate Davis BPL Member
PostedMar 21, 2010 at 6:58 pm

I'm making the switch to tabs for an upcoming speed hike, as well as some training hikes. The lack of a filter will save me weight, and the lack of a need to pump water will save me time. However, I don't want to be gulping down floaties.

What's the lightest and fastest way to filter out floaties? I'd rather not bring a dirty water bottle if I can avoid it. Will a bandana over the mouth do the trick, or is there a better way to filter out the big stuff?

PostedMar 21, 2010 at 7:14 pm

Nate I've been using this setup for some time and all I do is use my cup to carefully dip up the water. I guess this wouldn't work in all locations but I never seem to get very much in the way of floaties in the platypus, never have bothered to use a bandana or anything. Started this when my filter broke a couple of years back and never went back.

Lucas Boyer BPL Member
PostedMar 22, 2010 at 6:55 am

I recently discovered the difficulty of filling a platypus in a shallow stream. With a bit of work, I could get about 1.5L of the 2L I needed. So, I just took a ziploc I had in the food bag from my morning snack and dipped it and poured it in to the platypus. The harder plastic top doesn't deform when you tip it up and makes a pretty uniform stream to pour in to the mouth of the platypus. As for filtering the floaties, I'd suggest a bandana rubber banded over the mouth of your platypus. I've always got a couple of rubber bands in my pack for tying my liner bag shut.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...