Alright, my contrail just came in the mail today, and I need to seam seal. Should I pitch it to seam seal or lay it flat on the floor? Also, should I put some paper or something between the floor and ceiling when seam sealing so that the two layers don't accidentally get stuck together, or does that not happen?
Topic
should tent be pitched for seam sealing?
Become a member to post in the forums.
- This topic is empty.
It should be pitched while seam sealing it. I'd do it on a nice day outside that will allow several hours (all day if possible) of drying time.
Think of seam sealing as a fun activity instead of a chore! Grab a beer (or two), put a stereo outside with your favorite music, and have a fun time of it! You'll also want to paint strips of sealant along the floor to help prevent you sliding around. Unless you are EXACTLY level, you'll slide into walls while you sleep.
As above. Setting up your tarptent taut also makes for a better application overall.
As for "anti slip" stripping, I prefer to apply a few lines of sealant on the bottom of my sleeping pad — and leave the floor 'sealant free'. Makes it easier to brush away dirt, etc. off the smooth floor when cleaning the tent after use. But either way will do the job.
When I got my first silnylon shelter, I didn't really think painting lines on the floor or pad would make that much of a difference. Boy was I wrong. Paint the lines.
Thanks for the info. And I'll definitely have fun with this job. Anything do it yourself is always rewarding.
Become a member to post in the forums.

