Topic

Camelbak Flow Meter

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
Konrad . BPL Member
PostedMar 13, 2010 at 2:24 am

Just saw this, it seems pretty interesting, and the price is fair. Compatible with lighter weight systems like the Platypus.I know i've prematurely ran out of water before…

http://www.youtube.com/watch?v=FKtae1mUZ2k

and

http://www.rei.com/product/795867

My only question is whether the starting liters (ie 100oz) is programmable, or do you have to go with preselected amounts.

Whadya guys think?

*edit: BOOOOOOOOOOOOOO, I was wrong, guess its not compatible with platypus. From a trailspace.com review

"If you buy the standalone version of the Flow Meter and try to integrate it with a hydration hose from another manufacturer, there is a good chance that they won’t be compatible.

For example, I tried to push the hydration hose of a Platypus hydration reservoir onto the flow sensor barbs, without success. The Platypus hose width is not large enough to fit, no matter how hard you push."

…nothing a lil ky jelly wont fix :o

weird though, considering that I've seen people splice Camelbak bite valves to their platy tubes.

Robert Blean BPL Member
PostedMar 13, 2010 at 7:50 am

My only question is whether the starting liters (ie 100oz) is programmable, or do you have to go with preselected amounts.

The Camelback instructions for the device say Enter the Total Volume of water that you will be putting in to your CamelBak reservoir. Note: the Flow Meter may be programmed for any volume.
— MV

Dale Wambaugh BPL Member
PostedMar 13, 2010 at 10:10 pm

It's no problem coming up with barbed fitting adapters— a small section of hose to go from the device to the barbed step-up/down and then the hose to the Platy or vice versa.

barbed hose fitting

Robert Blean BPL Member
PostedMar 13, 2010 at 10:20 pm

The Platypus uses 1/4" ID, 3/8" OD tubing. I thought CamelBak was probably the same thing, since I have seen that some people like to take a CamelBak bite valve and use it with their Platypus. Given that, I thought that however they fit it into a CamelBak line would also work for a Platypus.

Am I overlooking something here?

— MV

Edit: I just noted that the first message was edited — I am still surprised. Does anyone know what is going on?

FWIW: when I did my gravity filter recently, I had to push a lot harder to get the barbed fitting into the Platypus drinking tube than into the CleanStream Hose Kit tube. At first I was not sure it would fit. The two tubes are the same dimension, but different materials — the drinking tube is quite a lot the stiffer of the two. Could that be what is going on?

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...