Topic

Thermarest Lite Seat= Awesome

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
Travis L BPL Member
PostedMar 12, 2010 at 12:48 pm

Ok, so I know some will scoff at this piece of luxury, but hear me out.

I originally wanted to try the Lite Seat as a pack frame for my frameless pack. Its 1.5 inches thick when fully inflated, and weighs 3.5 ounces. Thermarest claims 3 ounces, but my scale says differently.

I loaded the seat into the backpanel of my SMD Swift, and loaded the pack with 25 pounds. The seat is rigid enough to brilliantly sustain these weights and transfer the load to my hips while staying comfortable.

And hey, it doubles as my camp seat!

But wait! There's more!

Take the camp seat and open the valve and let it fully inflate (5 seconds). Fold it in half and place it under your head as a pillow. If you let your head sink in a bit and close the valve when its most comfortable, the seat sustains a slight depression that gently and comfortably cradles your head. The material is also soft enough to be used against your face (but I have some facial hair, so my skin on my face may be less sensitive than others). It works for side sleepers, back sleepers, and inflation adjustment is super easy because the seat is self inflating. This works brilliantly as a pillow!

So, yes, a 3.5 ounce inflatable camp seat is a luxury for an ultralighter, but given its full potential, this becomes a valuable piece of my kit.

PostedMar 12, 2010 at 1:32 pm

I have used my Prolite sit pad (in hot pink of course) as my pillow for years. I love that it doesn't slide all over at night. Also use it as a sit pad and as a step pad to get in and out of my tent.

Travis L BPL Member
PostedMar 12, 2010 at 1:39 pm

Yup, just discovered this baby. Can't wait to get out and use it for real!

PostedMar 12, 2010 at 3:39 pm

Nice multi-use thinking! I've done something similar using CCF. I use two pieces of 1/2" CCF pad that are hinged together to form a 1" thick seat. This pad also works great as backpanel support in my MLD pack (picture 2) and I can fold it open to use as a sleeping pad under my feet in addition to my short NeoAir (picture 1). This pad only weighs 1.6oz total. I then have a Kookabay 0.9oz inflatable pillow under my head so in total I get pack support, pillow, seat and leg/feet sleeping pad for 2.5oz.

For my sleeping pad system, I used to use a full length NeoAir (14oz) and now I use a short NeoAir (9oz) plus this pad (1.6oz) for an overall weight reduction of 3.5oz and the added functionality of pack support and a sit pad.

Sleep Pad 2

Pad Sleeve

PostedMar 12, 2010 at 4:02 pm

It's an '09 Revelation. It weighs 9.75oz including two shoulder strap pockets (1.5oz), all the bungie cordage (1oz), sternum strap (0.5oz) and my MYOG pad sleeve (0.5oz). This pack rocks…hopefully MLD does a 2010 version.

Kevin Babione BPL Member
PostedMar 13, 2010 at 4:59 am

Travis,

I too love the Lite Seat as my pillow but use a cheap polyester book cover that I "borrowed" from my high school daughter as a pillowcase. It's one of those super-stretchy book covers designed to fit a standard textbook and it works perfectly to hold the folded Lite Seat.

Another benefit is that it's clean – My Lite Seat tends to pick up dirt and debris as I use it as a sitting pad.

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...