Topic

Frameless backpack

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
James Connolly BPL Member
PostedMar 9, 2010 at 10:36 am

I've searched, but can't find anything that specifically addresses my concerns. Essentially I'm looking to get a frameless pack..specifically either a Zpack blast in dyneema or a MLD Burn 2010. However, my conern is weight distribution. I'll be carrying a maximum of 20 lbs. I use a Big Agnes Inslted Air Core Pad rather than a foam pad so I'm wondering how uncomfortable this would be, and/or whether the carbon fiber stay option offered by Joe (z packs) would mitigate not using a foam pad.

Thanks in advance for any help/guidance.

EndoftheTrail BPL Member
PostedMar 9, 2010 at 10:43 am

It can work. I assume you will be folding flat your Air Core and then slipping it into your pack. Just pack and cinch up everything into one nice, compact, solid mass.

Another alternative is to buy a piece of blue foam (cheap as heck @ Wally World, etc.) and size it down to the dimensions of your pack back. Just the one piece will weigh almost nothing –and it can do multiple duties by providing additional padding and rigidity to your pack back, serve as a nice chair pad at camp, and a nice wind screen when cooking.

Travis L BPL Member
PostedMar 9, 2010 at 10:59 am

I've tried the BAIAC with my SMD Swift. Like Ben says, it can work. The trick is to not inflate it too much, or it will push away from your back too much. I slip it in the pad pocket completely deflated with the valve facing up. Then I inflate it JUST enough to give me a thin solid layer of air, just to prevent things from poking me in the back. But like I said, not too much air! When its not on your back it may seem underinflated, but once on your back and the pad is receiving pressure from its entire surface, you'll realize just a little bit of air goes a long way.

I have actually found the inflatable pad to be very comfortable as a 'virtual frame.'

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...