Topic

Gossamer Gear shoulder strap help

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
Nathan Baker BPL Member
PostedMar 7, 2010 at 8:38 am

I just recently purchased a Gorilla and I am having a bit of an issue with the width of the shoulder straps. They tend to just scrape the side of my neck and after multiple adjustments I can make it better, but not great. Does anyone have any tips they can offer in regards to keeping the straps off your neck? Thanks

PostedMar 7, 2010 at 8:40 am

take out the foam, replace with socks.

if they are still too wide, try using round frame pad foam from the bike shop.

EndoftheTrail BPL Member
PostedMar 7, 2010 at 9:06 am

Some more optins…

Option A: remove and cut the foam narrower — then sew up.

Option B: sell the pack and get another one that's meant to fit.

GG packs are not for everyone. I too find their straps overly wide, scraping my shoulder/underarm areas.

Joe L BPL Member
PostedMar 7, 2010 at 1:54 pm

Pipe insulation is round with a hole in the middle. Split in half, it would have a more narrow profile than pad foam.

PostedMar 7, 2010 at 2:37 pm

I use 2 pony tail holders(Those little black strechy things) to keep the excess strap folded back.

Brad Rogers BPL Member
PostedMar 7, 2010 at 3:31 pm

I think they are coming out with a narrower strap option, at least on the smaller size packs.

Nathan Baker BPL Member
PostedMar 7, 2010 at 4:20 pm

Thanks for all the ideas. I knew when I purchased it that there were some people that had issues with the straps, but I thought i would give it a try. The pony tail holder seems like the easiest as well as the "why the heck didn't I think of that" idea (thanks Jeffrey). If that doesn't work I will try the pipe insulation. Thanks again and if anyone has any other suggestions Id appreciate hearing them.

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...