Topic

footprint lamination ?

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedMar 1, 2010 at 7:34 pm

Tent footprints have perplexed me long enough. Why is it that there is only a coating on one side of the sheet? It seems like having both sides coated would be better… Also, why is it that the laminated side is always facing up? It doesn't seem like this would matter in the sense that no matter which side faces up, the sheet will be equally as protective. I'm having trouble finding a reasonable explanation on the interwebs.

Thanks!
-R

PostedMar 1, 2010 at 8:11 pm

Here is my guess:
One coat: less weight
Shiny side up : less wear/damage and easier to clean
Franco

Bob Gross BPL Member
PostedMar 1, 2010 at 8:18 pm

If the coating on one side is properly doing its job, you wouldn't need coatings on both sides.

Of course, there are some other footprints with no coatings.
–B.G.–

PostedMar 1, 2010 at 8:45 pm

I was thinking, one coat: less cost to the manufacturer. But, I like your guess better. :)
Wouldn't it be better to have the shiny side down for ease of cleaning, since that's the side that will be in the dirt? Unless, the uncoated side is easier to clean…

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...