Topic

V. specific stove pot combo Q.

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedFeb 23, 2010 at 5:58 am

Hi all, I've asked this question in the UK, where the stove is common but the pot rare, with no luck.

Has anyone used an AGG 2L Aluminium Pot with the Vargo Jet-Ti? I ask because i've found that it skids around terribly on top of my MSR pocket rocket. The PR is a bit bent-up now so I thought I might replace that rather than the pot.

Would appreciate your 2c.

Stephen Bodiya BPL Member
PostedFeb 23, 2010 at 6:05 pm

I just tested this out. I filled the AGG 2qt (the anodized version – NOT non-stick) almost full and tried to push it around sideways. It was surprisingly sturdy. I ended up just pushing the whole canister around on my kitchen floor.

I couldn't believe this myself at first, so I tried out some other pots too. The grease pot from K-mart stuck pretty good too. I was able to push the BPL 1.3L around a bit more than the other two (but not much). I think the AGG is the best because the jet-ti's supports just fit inside the indented circle on the bottom. The water definitely helped too; with no water in the pots they slide very easily.

I'll have to try this out with my friends pocket rocket next time I see him…

By the way, http://www.gofastandlight.com has the vargo jet-ti for about $25 plus shipping. This is one of the few places I found with it in stock when I bought it recently.

Roger Caffin BPL Member
PostedFeb 24, 2010 at 12:56 am

MSR PR is not the world's greatest stove.

AGG 2L + Vargo Jet-Ti works OK.

Cheers

Stuart R BPL Member
PostedFeb 26, 2010 at 6:50 am

Hi Andy

I have a AGG 3-cup (0.75l) 'anodised' pot and that too slides around on a Pocket Rocket. Unfortunately I don't have a Vargo Jet-Ti to compare with but it looks a decent stove, if a bit expensive.

2p

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...