Topic

Ski Touring clothing layer system

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedFeb 20, 2010 at 2:52 pm

I'm trying to figure out the best way to utilize the clothing I have for efficiency, weight, versatility, and comfort on overnight ski tours in the Rocky Mountains in winter and spring.
I have:
150w merino t-shirt
150w merino longsleeve
First Ascent Bat Hang hoodie (micro-grid fleece)
MEC Ferrata II Hoodie (Shoeller Dryskin Extreme)
Marmot Driclime original
Marmot Precip
New Balance Fugu puffy (850 down)

What would be the best combo to wear and take?

David Chenault BPL Member
PostedFeb 20, 2010 at 7:30 pm

It really depends on the expected temperatures. Presuming that there's almost no chance of rain, and almost no chance of really cold (below zero) weather, I'd take the LS 150 baselayer, the driclime, and the Fugu.

PostedFeb 21, 2010 at 7:31 pm

Wow, thats so simple I didn't even think of it. I was too busy being hung up on the Ferrata. I wish the driclime had a hood though.
If it were below zero what would you add?

David Chenault BPL Member
PostedFeb 21, 2010 at 11:31 pm

For below zero, I'd want a hooded layer that was very wind resistant. I'd probably bring the schoeller.

PostedFeb 22, 2010 at 7:42 am

So did I. And so did a friend.
He took some leftover silnylon fabric, modeled the pattern on some hood from an old jacket and made his own for just a couple of ounces. A little velcro sewn on the outside jacket collar and the inside hood and – voila – instant hood.

I had a gortex hood for bicycling. A little velcro on the hood and the jacket and – voila – an even better hood than above.

So go find some old jacket or buy one from a thrift store with a waterproof hood and 15 minutes of sewing will do the job.

Marty Cooperman

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...