Topic

National Geographic Topo!

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
PostedFeb 3, 2010 at 6:31 am

This spring I am beginning a 2 year plan to climb every peak in the Wasatch so I am thining of buying this mapping software. I have been looking online for reviews but I can't seem to find anything newer than 2007. Has anyone used the state series, Utah in particular? I have yet to break down and get a GPS so mainly I would be printing out maps. From the reviews I read it seems like the resolution is poor but it could have been upgraded. Any info would be great.
Thanks

Mark Regalia BPL Member
PostedFeb 3, 2010 at 8:35 am

They are good topo maps. Basically they are USGS maps in a package that gives you a fair amount of flexibility. I pretty much just print out the areas that I visit. Use high quality paper and they can stand being soaked with water and still be usable.

I do have to warn you that when you set to print pay very careful attention. It is not very intuitive.

Keep in mind that all Topo maps of the US are based on USGS maps. They don't update them that often. In some places it is decades between updates. So 2007 is very recent in US Geology time.

PostedFeb 3, 2010 at 9:33 am

i use an older version of Topo! for planning hikes, and find that it basically works great for what i need it for. the interface is a little kludgy, but not a big deal once you are used to working with it. i just trace routes, drop in GPS waypoints if needed, export the maps to high-quality PDF, download the waypoints to my GPS, and print the maps on a high-quality color printer.

the printing is DEFINITELY not intuitive, but you get the hang of it if you mess around with it a bit.

and the maps are the usual 7.5' series, which for what i need is fine. not much has changed in the backcountry of the Sierra since the 1970s! of course, you'll want to get current info on trails (condition/existence!) and such before heading out.

PostedFeb 3, 2010 at 4:14 pm

Hi Chris,
I've been using NG Topo for several years. I have both Colorado and Wyoming.
Its a bit expensive if you need more than 1 state, nearly $100 per, but you can find them a bit cheaper if you search.
Watch out for GPS support. They don't support all GPS.
There are some other nice features, in addition to being able to print, like elevation profiles, etc. You can draw your route on the map.
You can print different scales. I often print 1:24000 on one side of the paper, and larger scale on the other.
Its really nice to be able to print what you need and not have to rely on USGS quads. It never fails your trip is where 4 USGS quads meet! With the software you just select the area seamlessly.
Tim

PostedFeb 3, 2010 at 5:46 pm

I have been using TOPO! (CA) for many years. They are just scanned versions of the actual USGS quads. You will see where some don’t line up right. And some will be in meters and others feet depending on the year that quad was updated.

I find it very valuable for trip planning.

I too print out just what I need on both sides of the NG waterproof legal paper. Boy does that beat buying all those quads of years past.

One thing I have found is that in the kind of terrain you are using it for (and I frequent the most) the routes will be off on the mileage by 10 to 14%. It does much better on flat routes.

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...