Topic

how warm is Capilene 4?

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
Jeff Jeff BPL Member
PostedJan 30, 2010 at 4:28 pm

I have some Capilene heavyweight/expedition pants back before they changed to Cap 4. I honestly cannot tell the difference between 100wt and the Capilene. If the new Cap 4 has a smooth face on the outside, that would be a nice touch for layering.

PostedJan 30, 2010 at 5:31 pm

it used to be called R.5, compared to my R1 jacket I think the .5 description is pretty good. Nice for walking in, I find the R1 to be too warm most of the time for hiking above freezing.

Ryan Teale BPL Member
PostedJan 30, 2010 at 5:35 pm

I would say they are pretty close. I have never used 100wt fleece as a next to skin layer which might make a small difference in perceived warmth.

I love my R.5 zip T which is basically the same fabric and like the stretch, smooth face, and fit better than fleece. I took it on my JMT hike as my clean layer for evenings and sleeping. I was plenty warm on my frosty 5am start from Guitar Lake up to MT. Whitney in 30 degree temps. I was wearing it as my baselayer with a 100wt beanie, Houdini, liner gloves and long pants. I also never took it off on the way down and didn't sweat profusely even though it the shirt is black and temps were in the 70's.

Richard Nisley BPL Member
PostedJan 30, 2010 at 5:38 pm

See A New Paradigm for Understanding Garment Warmth

Capilene 4 is a 5.3 oz version of Polartec PowerDry. By lab test extrapolation it is =5.3 / 6.5 * 0.32 = .26 Iclo. Polartec Classic 100 is .30 Iclo.

Research conducted at Natick labs established that the minimum difference in insulation that the average person can determine is .5 clo. So in other words, they will appear to be equal in warmth to the average person but they are designed for different purposes.

Polartec PowerDry and PowerStretch are designed to be worn as base layers. That is the reason that Lycra is added to these fabrics but not Classic Polartec insulation fabrics. For a base layer to maximize wicking they need to be in close contact with your body. These base layer fabrics also have bi-component weaves. The loose weave on the bottom wicks up body moisture and the tight weave on top spreads it out for faster drying. For fabrics to maximize warmth they need to be loose fitting. Insulation fabrics are not bi-component.

PostedJan 30, 2010 at 9:05 pm

Thank you all for your personal experience and thank Richard for the scientific calculation. That is exactly what I need.

PostedJan 30, 2010 at 10:02 pm

I have one for sale in the gearswap is you want to give it a try. I upgraded to one that fit me better.

YAMABUSHI ! BPL Member
PostedJan 31, 2010 at 9:54 pm

Probably not as warm as 2 to 3 level 1's or 2's (or any such combination) layered.

Definitely more expensive for one garment vs the modularity of 2 to 3 other garments.

– Yama T. Horz

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...