Topic

Custom eVent pullover?

  • This topic is empty.
Viewing 21 posts - 1 through 21 (of 21 total)
Sanad Toukhly BPL Member
PostedJan 26, 2010 at 6:20 pm

Is there anyone on this forum or elsewhere that is able to make me a custom eVent pullover with a hood? I can't seem to find anyone offering what I'm looking for in eVent. I am convinced that an eVent rain top for 7 oz or under is possible. A simple pullover with half zipper, hood, elastic cuffs, no pockets or any other extra features. Does anyone know if any of the cottage manufacturers would be able to custom make such a garment for me?

-Sid

Brad Rogers BPL Member
PostedJan 26, 2010 at 6:50 pm

It might be possible using some of the lighter eVent stuff MLD sells, but the ID pullover has no hood and no pockets and is still 8.9oz.

Sanad Toukhly BPL Member
PostedJan 26, 2010 at 7:02 pm

"It might be possible using some of the lighter eVent stuff MLD sells, but the ID pullover has no hood and no pockets and is still 8.9oz." -Bradford Rogers

Actually, ID claims that their eVent pullover is 9.6 oz in size Medium. Yet they list the weight of their eVent rain jacket at 8.9 oz in size Medium, even though it has a hood and a zippered chest pocket. Obviously something is off here. I am still convinced an eVent top can be 7 oz or under.

-Sid

PostedJan 26, 2010 at 7:20 pm

Sid,
Nothing is off, the pullover is made from a heavier, higher denier, fabric. This is explained on one of the retailer web sites, CC Outdoor I think. Yes indeed, it would be great if Integral Designs would make a pullover from the lighter fabric. Wild Things, here in NH, will probably not do it, as their products are intended for climbers, and the lightest eVent would not be tough enough.
Sam

Sanad Toukhly BPL Member
PostedJan 26, 2010 at 7:38 pm

"the pullover is made from a heavier, higher denier, fabric." -Samuel C. Farrington

That explains it. Thanks for clearing that up Sam.

AGG makes an ultralight Silynlon rain jacket. Maybe they can make me an eVent pullover.

-Sid

J B BPL Member
PostedJan 27, 2010 at 1:37 am

I found this yesterday:

The big news is that there will be two eVent shells coming later in the year, the Cypher Jacket (280g) and Smock (240g) as seen below.

I’m highly interested. :-)

PostedJan 27, 2010 at 2:20 am

Yep, OMM and Rab (Demand Pull On) are coming out with eVent pullover shells this year.

PostedJan 27, 2010 at 1:21 pm

The OMM eVent shells are looking good, they're using the lightest eVent fabric, where the Rab Demand is using a slightly heavier variation.
The Demand is coming in at 246g for a size large, and the long cut and proper hood have made it usuable in Scottish winter.
All we need now is Montane to jump in with an eVent smock, but they said last week they've got no plans for that at the moment.
Ach!

Aaron Sorensen BPL Member
PostedJan 27, 2010 at 3:14 pm

The other half of the problem with eVent fabric is the outer material of the shell, the nylon.

The ID eVent Pullover uses 30d while I'm sure the ID Rain Jacket uses 20d.

I have a biking jacket made with eVent that uses a 20d shell and it is much more breathable than the ID Pullover.

I'm sure MLD's 2.5 layer eVent is 20d as well.
The weight of the Hyvent DT fabric on the TNF Triumph Anorakis 2.1 oz/yd.
If you just found the weight of MLD's eVent fabric and did the math, you will get the weight of the jacket you are looking for.

Aaron Sorensen BPL Member
PostedJan 27, 2010 at 4:01 pm

2003 Pearl izumi Allegro Jacket
I love it so much I have 2 of them.

I am a jacket junky…

For eVent also own a heavier Lowe Alpine for skiing, the ID Pullover, and an eVent rain pant (? maker, actually ski pant modified).

Own a TNF Onsight (love it), the TNF Trajectory Hybrid (not good), a Haglofs paclite jacket (best other than the Pearl) and 2 Asics packlite jackets.

PostedJan 27, 2010 at 4:10 pm

"2003 Pearl izumi Allegro Jacket "

Got one.
But try to find something like that today…

Aaron Sorensen BPL Member
PostedJan 27, 2010 at 4:15 pm

So the eVent MLD has is 2.0 oz/sqyd.
The TNF Hyvent DT is 2.1 oz/sqyd.

TNF Jacket weight between 5.5-6 ounces.

With these calculations you should be able to make a full zipp jacket with the same features as the TNF, (or lack of) for 7 ounces.

I want one.
Already brought this up with MLD last year. Don't old our breath.
Now we just need to be able to buy the fabric.

My biggest hatred in my life has been that companies like Malden Mills and BHA don't sell their good stuff, ie. Pertex, eVent..

PostedJan 27, 2010 at 4:28 pm

I think you can get most polartec products by the yard from
http://www.milldirecttextiles.com/dept2.asp
This place is run by former employees of the Mallden Mills factory outlet store. MM is now bankrupt. The outlet store was great, but alas gone now.

Pertex is a different matter. I emailed them and they had no suggestions for buying small quantities.

Sanad Toukhly BPL Member
PostedJan 27, 2010 at 9:05 pm

The best option seems to be to get my hands on some 2ply eVent and sew the jacket myself. That, however, seems just as hard as finding a 7 oz eVent pullover. Nobody seems to sell eVent fabric (except in large quantities).

I hope this is just a phase because it is a fairly new fabric. Maybe in the future it will be just as easy to buy eVent as it would be any other fabric. Until then, I can only hope a major manufacturer decides to make what I'm looking for.

-Sid

Brad Groves BPL Member
PostedJan 28, 2010 at 7:37 am

Nope, they're not going to be selling eVent unless you're an approved manufacturer. And manufacturers I've contacted are unwilling/unable to sell to MYOG'ers.

J B BPL Member
PostedJan 28, 2010 at 7:51 am

All we need now is Montane to jump in with an eVent smock, but they said last week they've got no plans for that at the moment.

They should just re-release the Quickfire, make the cut more athletic and fix the backwards cuffs.

Viewing 21 posts - 1 through 21 (of 21 total)
Loading...