Topic

Strongest, longing holding tape for Cuben Fiber

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
Roleigh Martin BPL Member
PostedJan 21, 2010 at 9:05 pm

What is the recommendation of those who have worked with Cuben Fiber for the Strongest, longing holding tape for Cuben Fiber, something that can hold up to taughtness of putting up a tent, something that can hold up to rain, folding up multiple times, washing in a washing machine, and tumble drying in a dryer (low-to-no heat).

I have used sheathing tape to make my cuben fiber sacks waterproof and they hold up quite well, even through a washing/drying cycle as described above. But wanted to know if anyone has something better. The cuben fiber tape I have seen at end-user retailers I did not find to stick so well to the fabric. The sheathing tape sticks phenomenally well and lasts — but it's dog-gone ugly and wide. Wish you could get it in clear shape and only about 1.25" wide — not the typical 1.8 " wide you see at places like Home Depot.

PS, I am interested in the tape for holding together a MYOG tarp tent using Cuben Fiber.

Roleigh Martin BPL Member
PostedJan 22, 2010 at 4:53 pm

Ross, I found bits and pieces but nothing current and focused deeply on this topic. I also want addressed whether or not the person has washed the taped-fabric and how well it survived the wash/drying.

For instance has anyone tested tape versus sewing and sealing and if so, sealing with something silicone based or urethane based sealant? What proved to be a better method?

>> Bender << BPL Member
PostedJan 22, 2010 at 6:25 pm

I have heard good things about Hysol U-09fl & U-09LV although I have no experience with it. Since this is an adhesive you would not need to seal the seams!

Ross Bleakney BPL Member
PostedJan 22, 2010 at 9:41 pm

You might want to post the question on MYOG as well. This forum gets a lot more action, but I'm sure there are folks who only read the MYOG section (and many of those folks know a lot about of Cuben).

PostedJan 23, 2010 at 7:04 am

I'm interested in this question, too. I have a new cuben Duomid that I want to seam seal, but am not sure if I should use tape or sealant. Searching the forums doesn't reveal anything clear and dependable. And the search itself is quite time consuming and inefficient. It would help a lot if someone who does have the answer would share their knowledge.

Roleigh Martin BPL Member
PostedJan 23, 2010 at 7:22 am

I posted at MYOG asking people to read and reply to the thread here. Next time I'll ask over there though. My bad.

PostedJan 23, 2010 at 9:04 am

I am in the midst of tests on glues and sewing of cuben.I am not yet finished.
I have no knowledge of tapes. I think Tim sews and tapes cuben. I you have a ready sewn item like a duo mid I would use Aquaseal and maybe thin it with cotol 240 as it is a bit thick. These options stick pretty well to cuben. I have tested a 6mm x 25mm patch of glue glue glueing 2 overlapped pieces of cuben. Both Aquaseal and thinned aquaseal took 13 kg before the glue bond broke. In one case damaging the edge of the material in the process. My test equipment is not perfect so I am probably stressing one edge of the patch more than the other. You might therefore be able to get to higher breaking forces but it shows that Aquaseal is very suitable as a seam sealer and will add strength. In Britain Aquaseal is a lot cheaper than Hysol. Hysol may be stronger and people feel (and my non scientific tests of peel agree) it has better peel resistance. As a seam sealer these advantages are not important. I have not tested silicon sealer.
If you are starting from scratch, it depends: I have just made a cuben dry bag using hysol and no sewing except at the opening. Glueing straight seams without sewing is possible. It saves weakening the cuben and saves sealing the stitches. I am pretty sure a glue seam, like a ridge, does not need to be wider than 20mm 3/4"
I am in the midst of making a tarp tent and with curved seams I am sewing with long stitches, which makes assembly easy and then using Aquaseal to glue a glue flap down beside the sewing. I may then sew again on the other side of the glue seam. Aquaseal's probable poor peel is solved by the sewing and I plan on sewing anyway. I will probably use hysol at high stress points.I am using 25 gram /sqm 0.7ish ounce/sqyd cuben. The weaker cuben 0.33 ounce/sq yd will be more critically weakened by sewing

A Wilson BPL Member
PostedJan 23, 2010 at 11:22 am

From what I gather (no experience here at all, just curiosity), there are many adhesives that will hold cuben tenatiously; the problem is getting to do it over a wide temperature range and after significant UV exposure. Adhesives, even the very best ones, are notorious for becoming yellow and powdery, especially if exposed long term to UV.

I think we need more long-term field reports from different kinds of users before we can get a bead on what really works, and how durable various options are. Anybody out there who can report? (MLD's buyers, Bill Forshnell?)

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...