Topic

Replacing zipper pulls with accesorry cord?

  • This topic is empty.
Viewing 18 posts - 1 through 18 (of 18 total)
PostedJan 19, 2010 at 10:03 am

Is this a crazy idea, to save 1g per zipper pull, to replace the metal tab with a short length of accesorry cord?

Potential negatives:

1) Waste of time for minimal savings … this is definitely crazy gram counter status :)

2) Re-sale value goes down

3) Loss of functionality – this is what I'm most interested in. Has anyone actually done this and regretted it?

Anything else I'm not thinking of? :)

PostedJan 19, 2010 at 10:09 am

I've done it quite a bit.

1. Weight savings is probably minimal unless there are lots of zippers (like on a Hilleberg tent) or the zippers are very large.

2. Resale value goes down. Hard to say on this one. It's a non reversible mod.

3. Loss of functionality. In my opinion, there is no loss of functionality, in fact the functionality is improved. cord pulls are much easier to grab onto (especially with gloves), and are quieter.

Fred Eoff BPL Member
PostedJan 19, 2010 at 11:17 am

IMHO, going to the trouble of replacing a zipper pull with cord is a tad over the top in terms of any significant value in reducing weight. Now if you want to add a short section to a zipper pull to make it much easier to use those small zippers that is a worthy endeavor. IMHO of course.

PostedJan 19, 2010 at 11:21 am

Hi Daniel,

Thanks! Thinking about it – I do agree that the zipper pulls will actually add quite a bit of functionality.

PostedJan 19, 2010 at 11:21 am

Hi Fred,

You have a very valid point of view on it. Then again, sometimes we are bit irrational in our reduction of weight!

Robert Carver BPL Member
PostedJan 19, 2010 at 11:34 am

I cut the metal zipper pulls off my Trango 2 and replaced them with cord. Not really for the weight savings, but because after enduring strong winds in the Wind River Range and dealing with the noise of the metal pulls ratteling together.

John S. BPL Member
PostedJan 19, 2010 at 11:36 am

Thought about it alot, but then I just take my medication and go wash my hands for several hours instead.

Art … BPL Member
PostedJan 19, 2010 at 11:51 am

This is one reason to have a very accurate scale that measures to at least 0.1 gram.

my guess is you would NOT save an entire gram per zipper pull, and the change could actually net NO weight saving if your metal zipper pulls are small.

1. get an identical zipper pull from another source and weigh it.
2. cut and weigh 1 piece of intended cord.
3. if the overall weight saving from replacing all the metal pulls exceeds 5 grams then go for it.

PostedJan 19, 2010 at 12:00 pm

Hi Art,

I cut out all the zipper pulls on my Akto and replaced them with cord pulls and the weight savings was way more than 5 grams. If I recall correctly it was something like 1-1.5 oz. Of course that tent has a ton of zipper pulls. Doesn't seem like much but that along with other small incremental weight reductions enabled me to get the weight of my Akto down to 2lbs 10 oz.

Roger Caffin BPL Member
PostedJan 19, 2010 at 12:11 pm

It's probably crazy, but there are times when just adding a bit of cord or a bit of tape is useful for other reasons.

I make a lot of my own gear and the zippers I use don't have anything more than a short metal tab on them. These can be a bit tricky to operate in the cold or with gloves on. So I add either cord or tape to the short pull and all is easy. Works fine even on my snow tents.

Cheers

PostedJan 19, 2010 at 5:08 pm

I'll admit to doing this, but only because it makes it easier to manipulate zipper pulls with cold or wet fingers. I use the outer sheath of Kelty triptease…

YAMABUSHI ! BPL Member
PostedJan 19, 2010 at 8:41 pm

1. It's not a waste of time because in reality if you took the time to just make moderate mods and adjustments to pack weight you'd be a lightweight-traditional backpacker. As Ive seen and participated in we are pushing the envelope of weight and playing the "gram-game" so you only get to UL & SUL by being absolutely methodical in weight reduction (i.e. going ape $h!t with a seam ripper).

2. Resale value????? Pfffft Please, most of my gear meets the reaper long before it gets sold.

3. If anything you gain functionality… no regrets. I use my favorite color of reflective cord so any nitemoves action still allows me to find my pack easily!

-YAMABUSHI THUNDERHORSE

EndoftheTrail BPL Member
PostedJan 19, 2010 at 9:49 pm

I do it all the time — esp. on tents. Metal zipper pulls can become annoying "wind chimes"!

PostedJan 20, 2010 at 8:21 pm

Thanks guys. Went ahead and did this on my MLD Duomid already. Those metal zipper pulls were heavier than I'd imagine! I replaced my yellow mld guyline with triptease, got rid of the metal pulls, and removed 2 of the side linelocs to save an ounce. Not shabby. I also did this on my Montbell UL Down Inner and do like the way it feels on clothing. Will be going through the closet ruthlessly once some really thin cord I ordered comes in :)

Roger Caffin BPL Member
PostedJan 20, 2010 at 10:28 pm

> once some really thin cord I ordered comes in

You could also look at rather narrow ribbon – say 5 mm wide. Works well. All sorts of colours too!

Cheers

PostedJan 22, 2010 at 8:35 pm

Just wanted to chime in after my gear surgeries. Using the 80lb. polyster cord found here:

http://www.zpacks.com/accessories/spectra_cord.shtml

I was able to pretty easily knock off 7 – 11ish grams per piece of clothing, particularly if it had a lot of zippers. Besides the small weight savings, I do like the way the new zipper pulls feel. Very easy to use with gloves.

EndoftheTrail BPL Member
PostedJan 22, 2010 at 8:52 pm

Christopher is now securely captured by the gram weenie dark force. Welcome to the dark side. Mwahahaha…

>> Bender << BPL Member
PostedJan 22, 2010 at 10:24 pm

FYI Big Agnes actually removes zipper pulls and uses cord on some of their lightest tents like the Fly Creek. I just finished sewing the door on my newest tent creation. The #3 zipper is so light I doubt it would save much more than 1g replacing the pulls. I weighed a #3 YKK pull and its only 2.2g to start. I may replace the pulls but mostly to get rid of the wind chime affect. Now if I did this on my 5.25 pound Kelty Zen it would save some substantial weight. The pulls are huge and there are 9 of them.

Viewing 18 posts - 1 through 18 (of 18 total)
Loading...