Topic

Patagonia R1 fabric

  • This topic is empty.
Viewing 17 posts - 1 through 17 (of 17 total)
PostedJan 17, 2010 at 10:33 pm

It seems the consensus for the R1 fabric is that it perfectly balances insulation with breathability during high-output activities. However I can find very little about people's opinion about its use in-camp or as part of a sleeping system.

I think they would be a good mate with my Golite Ultra quilt.

Anyone wear the R1 pants to bed?
Just wondering because they are 39% off at e-omc.com and that is a d@mn fine deal if you ask me. (btw i cant believe i have to edit the word d@mn. they say it in PG disney movies, but thats another thread i guess)

http://www.e-omc.com/catalog/products/6687/Patagonia-R1-Pant-Mens.html

Jim MacDiarmid BPL Member
PostedJan 18, 2010 at 8:30 am

I have a Patagonia R1 Hoody and a pair of Black Diamond Sportswear Powerstretch tights. According tothis chart, powerstretch is ~1/3 warmer than the Polartech powerdry R1 fabric. I just used the powerstretch tights as part of a camp and sleep system last weekend in temps dropping into the mid 20s. As hiking and campwear, I wore them under wp/b full zip pants unzipped to vent while hiking and zipped around camp for windproofness. I was fine doing camp chores like setting up a tent and gathering snow for melting, but added my insulated pants as my metabolism slowed down while cooking and eating dinner. My sleeping quilt is a 32 degree nunatak, and the tights + wp/b pants were just what I needed to add those extra degree to my quilt.

That is a really good price for the R1 tights, but if I had the choice, I pick the powerstretch for the added warmth, slightly lower weight (5.68oz in my L), lower price (mine were $35 shipped from STP)I prefer the way the interior fabric feels, and I think the powerstretch face fabric fends off snow better than the powerdry.

In fact, here is a thread that does a nice job of summarizing the pros and cons of each.

Brett Peugh BPL Member
PostedJan 18, 2010 at 8:54 am

I don't know if one could make that statement as the R1 has a specific weight of the PD and the PS mentioned is just vague with no fabric weight mentioned.

David Chenault BPL Member
PostedJan 18, 2010 at 9:21 am

I'd get the tights.

R1 is a superlative fabric, especially for winter use. With a breathable windshell over it, R1 moves moisture remarkably well, much better than powerstretch IME. This wouldn't necessarily benefit sleeping all that much, but the fabric is still quite warm for the weight.

Jim MacDiarmid BPL Member
PostedJan 18, 2010 at 9:30 am

I don't know if one could make that statement as the R1 has a specific weight of the PD and the PS mentioned is just vague with no fabric weight mentioned.

That may be true. I was operating on the (possibly incorrect) assumption that since the Powerstretch was included in the 100 weight fleece category of the chart, it was 100 wt powerstretch.

Brett Peugh BPL Member
PostedJan 18, 2010 at 9:41 am

I have an R.5 top that is 5.3 PD versus the 6.5 PD for the R1 and I know that sitting around at 65F in it alone and I will sweat.

PostedJan 18, 2010 at 10:31 am

Thanks for the advice guys. Even though the R1 pants are a little heavier and more expensive, I decided to order them. The reviews on the patagonia website make me envious, and I like that they can be used for sleep pants three season and active pants in the winter. Im gonna test them out going up Mt. Baldy after this storm drops tons of snow up there.
Also, its also hard to resist getting some Patagucci at a reasonable price. If it wasnt so expensive, Id probably be swaddled in it 24/7.

Richard Nisley BPL Member
PostedJan 19, 2010 at 12:34 pm

Brett,

You raised a valid point when you said, "I don't know if one could make that statement as the R1 has a specific weight of the PD and the PS mentioned is just vague with no fabric weight mentioned."

The Power Stretch fabric that I used for the Iclo test graph was:

Polartec® Power Stretch® P-670S
Single sided fleece blend of polyester, nylon and Lycra®.
Used in: Garments and Gloves
Weight: 6.7 oz/yd2
Moisture Management – Brushed polyester inside and denser nylon outside work together to pull moisture away from the skin; Comfort – Warm four-way stretch, anti-microbial finish; Durability – Nylon outer surface adds high abrasion resistance, tear strength and wind resistance.

This is the same base layer fabric that I mentioned here:
http://www.backpackinglight.com/cgi-bin/backpackinglight/forums/thread_display.html?forum_thread_id=27693&skip_to_post=229500#229500

Mike M BPL Member
PostedJan 19, 2010 at 7:59 pm

I'm using a R-1 zip top and R-1 pants as my insulating layer and as part of my sleep system, if the weather looks like it's going to be on the extra cool side I add a down vest or leave the R-1 top at home and replace it w/ a down jacket, but I keep the pants.

I've been very impressed w/ it's performance. I don't use it much when active (but when I have it find it breaths well), but around camp and in the tent the stuff works great.

Nia Schmald BPL Member
PostedJan 19, 2010 at 8:25 pm

I think this Nisley classic, LINK is the best detailed explanation of clothing needed based on temperature and level of activity.

The chart shows that while R1 (or powerstretch) are a lot of insulation (work at low temperatures) while moving, they don’t give you more than a few degrees, not more than 5, while sleeping.

I have an R1 pullover and it’s great while hiking in temps in the 20s – 30s. And if I take it I certainly wear it while sleeping. But if day time temperatures are warm and it’s only cold at night when I’m stopped, then a down jacket and pants work better for me for comfort while sitting around in camp and to extend the warmth of my golite quilt.

The weight of the montbell inner down pants is about the same as the R1 and they are much warmer.

PostedJan 19, 2010 at 9:47 pm

If the R1 fabric has a "denser nylon outside" it will HOLD moisture more than the inner polyester,as nylon tends to dry more slowly than polyester fabrics. Whether the nylon outside actually wicks is another matter and I'm not sure if it does. Silk, cotton or wool will wick but nylon, I'm not so sure.

john griffith BPL Member
PostedJan 23, 2010 at 4:50 am

There is a need for a Nisley's greatest hits list somewhere. I have been working on trying to go through his posts to see what I can learn. Dang, that guy has been prolific! I would be interested in knowing whether the polartec 100 listed in the fabric comparison chart was single or double faced. It would seem like the double faced 100 wt. fleece would have a significantly greater warmth rating than the single sided fleece. I would also expect that a double sided 100 wt. fleece would have to be warmer than the R1 fabric which is a single sided fleece.

Jim W. BPL Member
PostedJan 23, 2010 at 9:24 am

Eric said:
"If the R1 fabric has a "denser nylon outside" it will HOLD moisture more than the inner polyester,as nylon tends to dry more slowly than polyester fabrics."

The R1 fabric is all polyester. Powerstretch has the "denser nylon outside".

Brett Peugh BPL Member
PostedJan 23, 2010 at 10:22 am

Insulated pants are nice for when it is really cold but I still like my old expedition weight Patagonia sweatpants. You can use and abuse them which you can not do with the Montbell stuff.

Richard Nisley BPL Member
PostedJan 23, 2010 at 10:34 am

John,

The Polartec products, in my chart, had the following detailed product designations and average weights:

100 Classic 193 g/m2 5.7 oz/yd2
200 Classic 250.9 g/m2 7.4 oz/yd2
300 Classic 362 g/m2 10.7 oz/yd2

Note that the first digit of the g/m2 value designates the sub type in the Polartec Classic line.

Brett Peugh BPL Member
PostedJan 23, 2010 at 11:10 am

Do you think you could do an updated chart with the new data in it Richard?

Viewing 17 posts - 1 through 17 (of 17 total)
Loading...