Topic

Foretrex 401 & National Geographic TOPO!

  • This topic is empty.
Viewing 12 posts - 1 through 12 (of 12 total)
Robert Blean BPL Member
PostedJan 10, 2010 at 12:28 am

The specifications for the Garmin Foretrex 401 appeal to me. Before going any further, though, I want to ensure that it works with National Geographic TOPO! Unfortunately, as far as I can find out, it does not.

Is there any way to make the 401 work with TOPO!, or do I just need to continue to be patient and hope that NG will (eventually) provide support? What would it take to support the 401 — anything that I could do myself, or must it be done by NG?

Thanks,
Bob

Bob Gross BPL Member
PostedJan 10, 2010 at 11:28 am

You know, the Garmin Foretrex 401 is really tiny. Its display is tiny. Its processor is tiny. It is "strapped" for power.

It really cannot support the fancy user interface that modern receivers have, and its user interface functions are much more akin to the basic receivers that we had 10-15 years ago.

–B.G.–

Jennifer W BPL Member
PostedJan 16, 2010 at 11:43 pm

Any luck yet? I've had really good luck with them in helping me figure out how to fix a problem I was having.

If you were using a Mac, I would have suggested that you need a specific adapter just to communicate with the Mac. However, that's not the case with the PC.

Robert Blean BPL Member
PostedJan 17, 2010 at 12:11 am

I have not talked to them yet. One reason is that I do not have a GPS, and I have not fully decided which GPS I would like to get.

I have always been a map-and-compass guy, figuring a GPS is unnecessary weight and complication. The basic things making me re-think that are:

* I would like to be able to have the GPS log my track as I walk a trail. I would then use that information to build up an NG TOPO! overlay of local park trails, with the idea that I could share it. (I was impressed with a similar thing done by a guy for Henry Coe State Park — a very big project, and most helpful.)

* It would be nice to get a summary of distance and vertical I have gone in a day. I would hope that a GPS with a barometric altimeter could do a better job of that than one without the altimeter, so I want a GPS with a barometric altimeter.

The 401 seems like the lightest one that would do those things, and it is moderate-priced. Unfortunately AFAIK NG TOPO! will not communicate with it. So I need to either solve that problem, or else find a different model.

Of course, choosing a GPS is a slippery slope and it is easy to construct a chain of logic showing that what I really want is the twice-as-heavy, twice-as-expensive, already-announced, soon-to-be-released, Garmin Oregon 450t (I do not feel the need to pay an extra $100 for the camera in the 550t).

— Bob

PostedJan 17, 2010 at 6:55 am

Thanks for posting this Bob.
I'm in the same boat. I'd like to get a 401 to replace my geko. The 401 has much better battery life! But I'm heavily invested in the NG TOPO! software and it appears the 401 is not supported.
Someone did post this link http://www.gpsbabel.org, but I'm unsure if this software would really help as I've just now discovered it. It does support waypoint conversion but that is all for TOPO.
Tim

R Y BPL Member
PostedApr 2, 2010 at 8:25 pm

I just acquired a foretrex 301 and also have NG topo 4.5 running under Windows XP Home. Seems to work if you set up Topo to look for the Foretrex 101/201 and USB interface.

When you go to click the 'Test GPS Connection' button it comes back with the right model number. Seems to work so far..

PostedApr 2, 2010 at 9:20 pm

I was unaware that ANY Nat'l. Geo. TOPO would work with a Garmin. I have a Colorado 300 W/ Topo USA on a 4 GB SD card. Can I load the Nat'l Geo. Trails maps through some sleight-of-hand computer wizardry?

Bob Gross BPL Member
PostedApr 2, 2010 at 9:34 pm

I use National Geographic TOPO! with an old Garmin, and Garmin software with a newer Garmin Colorado 300. Go figure.
–B.G.–

R Y BPL Member
PostedApr 4, 2010 at 8:55 am

NG Topo worked fine with my garmin geko 201 (serial interface). Got the foretrex to replace the geko after it got lost.

There is actually a list of GPS's supported here –

http://www.natgeomaps.com/gps.html

Drew Smith BPL Member
PostedApr 4, 2010 at 8:09 pm

It sounds like you are mostly looking for a data logger rather than a navigation device. Qstarz has several very lightweight loggers – I have the BT1200 which has a solar panel on it to extend battery life:

http://www.qstarz.com/Products/GPS%20Products/BT-Q1200Ultra-F.htm

If you have a PC, it comes with driver software, otherwise you can use BT747 freeware (http://www.bt747.org/) to download log files and convert them to GPX format. Once in GPX, you can open in TOPO or Google Earth and start creating maps. One drawback of the BT1200 is that it does not allow you to log waypoints – I typically do this after the fact using TOPO, or by copying coordinates from photos that I've geotagged.

Viewing 12 posts - 1 through 12 (of 12 total)
Loading...