Topic

Sleeping pad

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedJan 6, 2010 at 6:01 pm

I have been looking at a few different pads for my now forming UL kit. My short REI trekker pad is around two pounds so that won't fly. One idea I have is to buy one of those blue ccf pads at walmart and cut it down to a torso pad. The benefit I see in that is I can stick it in my pack and put everything inside it so the pad can be a frame.

I have also looked at the thermarest zlite and the GG Nightlight torso. I would cut the zlite down to a torso pad. I really don't want an inflatable pad in case it gets punctured.

With those folding pads I would just place them in my pack so they rest against my back as a frame right?

James Naphas BPL Member
PostedJan 6, 2010 at 6:08 pm

It depends on the pack. Assuming you're using a frameless pack, with some you're better off packing burrito style, where you put the pad in as a cylinder and put the rest of the stuff inside. Others work better with the pad forming a virtual framesheet, and still others, such as models from gossamer gear and six moon designs, have a pad pocket integrated into the pack.

Andy Berner BPL Member
PostedJan 6, 2010 at 7:26 pm

Yea, just roll up a foam pad and put it in your pack first. Then let it unravel and push it out to give the pack a frame. It will work great in that pack.

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...