Topic

Which is more prone to condensation

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
PostedJan 3, 2010 at 7:55 pm

Silnylon or cuben when used in a shelter (say, the DuoMid) or a tarp (say the Hex Hammock tarp).

Does the sil 'breathe' better so condensation would be less? Or are they so close it doesn't really matter/make much difference?

Thanks.

EndoftheTrail BPL Member
PostedJan 3, 2010 at 8:17 pm

I would say both are very prone to condensation without generous and well-designed venting. To the extent one might be more or less prone than the other probably makes little practical difference.

PostedJan 3, 2010 at 8:20 pm

Neither silnylon (any) nor Cuben (any) can "breathe "
With silnylon the silicone impregnation prevents the nylon from breathing .
Cuben can be made with Dyneema,carbon or aramid fibers sandwiched between a film layer such as Mylar or Flouride.
The film layer does not breathe.
Franco

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...