What are you guys using for insulating your water bottles in winter? Any good source for lightweight neoprene bottle cozies that I don't have to make myself? :)
Topic
Winter Water Insulation
Become a member to post in the forums.
- This topic is empty.
check out 40 below
reflectix
I made one last year from a double layer of reflectix and some grey tape for a 1 L Nalgene sized bottle. Ended up weighing 3.2 ounces. I left it outside with a liter of hot tap water and it didn't freeze after 12 hours of exposure to 0 F temps. On a winter trip it worked great as well. I'd be tempted to cut the weight by only using a single layer and less grey tape. Here is a pic:

Here is the 1L boot from 40 Below:
http://www.40below.com/products_Results_bottlecovers.php?CategoryName=bottle_covers
Outdoor Research makes some boots as well:
http://www.outdoorresearch.com/site/water_bottle_parka.html
You can try using a Camelbak with foam pipe insulation on the hose, and blowing air back into the reservoir when you are finished drinking. Eventually, even the valve will freeze… Wrapping the reservoir in a plastic bag and then some back-up clothing works pretty well inside your pack.
For biking, North of 60 we all carry skinny thermos bottles with a plastic lid we can somehow drink out of. Wide mouth thermoses also get carried as waterbottles and eating bowls, as below -10C eating out of an uninsulated container just leads to frozen food….make sure all mouth-contact parts are plastic, or wrapped in plastic tape, things tend to ''stick painfully'' otherwise, as in your mouth or tongue below -5C!!
The Reflectex or mylarized-bubblewrap is not bad for shorter periods of time…say an hour at -10C. The dog mushers, and us cyclists use coolers with added insulation in the lids, to keep stuff from freezing when we haul groceries home, or hot food to dogs at 30 below…
Turning containers upside down, if you trust the lid, also makes a difference as the heat rises towards the better-insulated base, and should it freeze, the ice will not block the lid.
Become a member to post in the forums.

