Topic

REI 1.5 self inflating pad – broke valve

  • This topic is empty.
Viewing 9 posts - 1 through 9 (of 9 total)
Steven Hanlon BPL Member
PostedDec 30, 2009 at 8:26 pm

i took my sleeping bag and pad with me to REI to check out a bivy this evening. as i was laying in the bivy i heard a faint hiss of air escaping the sleeping pad.

i looked around and discovered it was coming out of the valve. there are 3 "bridges" that hold a center cover in place to allow air into the pad – two of the "bridges" are broken – the rim where they connect to the outer edge is cracked. no amount of duct tape is going to fix this. the center cover needs to hold down a spring, but i can not come up with a solid fix – when i lay down i slowly sink to the floor.

i have owned the pad for 4 years, but it has gone unused for the past 2 years. i think it's a poor design and am thinking i should be able to return it to REI. before i do that, has anyone had this problem and is there a fix?

EndoftheTrail BPL Member
PostedDec 30, 2009 at 8:51 pm

I actually prefer the REI Lite Core valve — one quarter twist of a turn and it's locked tight — unlike the Thermarest ones where you have to twist around and around many times to close the valve.

Sorry that your valve broke, but I am absolutely sure that REI will stand behind its products and will either give you an exchange or a refund — your choice.

Steven Hanlon BPL Member
PostedDec 30, 2009 at 9:31 pm

in looking at the problem and then the contents of my pocket, i have come up with a trail fix if this happens to you.

here is what the broken valve looks like:

broken valve REI 1.5 pad

here is a US dime that fits into the recessed area:

broken valve REI 1.5 pad - dime

here is the dime duct taped in place. you need a strong duct tape – not a gummy adhesive kind. that will not hold the dime hard in place to apply pressure to the spring.

broken valve REI 1.5 pad - final

i laid on this for 10 minutes and it did not leak. i can blow air into the pad due to the opening where the rim broke off.

when was the last time a dime saved your night?

i have no doubt REI will stand by the product, it's a bummer, but that's why i buy from REI.

Steven Hanlon BPL Member
PostedDec 30, 2009 at 9:45 pm

not sure if it was stepped on or if that was from me laying on it while i tried to zip up the bivy. i had the entire affair on the concrete floor at the store.

so maybe some good came out of it – i came up with a fix without having to worry if it works at 3am on the hard ground.

Steven Hanlon BPL Member
PostedDec 31, 2009 at 6:39 am

i think i have figured it out. if you push too hard on the valve when closing it, you can crack the plastic. the center circle gets raised up and the brittle plastic does not give.

i just finished off the valve by pushing down when i twisted it instead of simply giving it a light pressure and twist.

it's going back today.

EndoftheTrail BPL Member
PostedDec 31, 2009 at 7:29 am

I've always given mine a simultaneous push down and twist — at the sides. Never a problem. Why would you want to push down at the center plastic circle? But even then, the plastic shouldn't just crack like that. Maybe an anomaly. Every brand of everything has a few…

Steven Hanlon BPL Member
PostedDec 31, 2009 at 8:13 am

if you push the cap too far down, it stresses the center portion – the cap doesn't bottom out first. do that enough or when the plastic is really cold and i can see why it cracked/snapped.

should be made of a more flexible plastic imo.

Steven Hanlon BPL Member
PostedDec 31, 2009 at 12:51 pm

REi took it back. i decided to give the big Agnes insulted Air Core a try. so far the in home test has determined that much huffing and puffing is needed.

Viewing 9 posts - 1 through 9 (of 9 total)
Loading...