Topic

Favorite Snow Melting Pot?

  • This topic is empty.
Viewing 12 posts - 1 through 12 (of 12 total)
PostedDec 29, 2009 at 8:02 am

Haven't seen one of these threads in a while … so with the current state of things, what are some of your favorite winter pots during which you will be melting snow?

Weights would be lovely as well.

I know of the AGG 2 Qt. Non-stick Aluminum pot … @ 5.9 oz. No handles, so some sort of lifter must be factored in (Gloves?). Sweet deal for the weight. I generally prefer uncoated pots though.

Any others?

Steven Evans BPL Member
PostedDec 29, 2009 at 3:42 pm

Really depends on how many people or how m uch water you are trying to get. I've used a few different ones and settled on the Firelite SUL 1350 (or whatever it is called). For me, the 850 would be a bit snug for me but to each their own. I spend hours melting snow so a bigger pot is nice.

Tony Beasley BPL Member
PostedDec 29, 2009 at 4:19 pm

JetBoil GCS pot, not the lightest but in combination with the Coleman extreme stove a top performer.

Tony

<center>
Xtreme stove and JB pot

</center>

Brad Groves BPL Member
PostedDec 29, 2009 at 4:32 pm

MSR 2L Ti; no longer made, might be able to pick one up on sale? Replaced w/the Exo 2 Pot, a 2.5L. I prefer larger volume for snow melting, makes life a lot easier. Pack up a good tight, large snowball and dump it in the water. Bigger pot=more hot "seed" water=faster melting when you add. Also just easier getting big clumps in.

PostedDec 29, 2009 at 9:18 pm

My recent favorite snow melting pot is the JetBoil 1.5 L pot WITH lightening mods.

MODS:

1. remove the steel wire handle
2. carefully cut off (most of) the wire handle's mounting plate with a Dremel tool cutting disc, leaving the rivets
3. cut a circle of plastic out of the bottom "Flux Ring" protector, leaving enough to cover the corrugated ring.

I use a skeletonized aluminum pot gripper for a handle.

Finally, I use an MSR heavy foil windscreen with that JetBoil pot to get max efficiency with my MSR Dragonfly white gas stove.

PostedDec 29, 2009 at 11:34 pm

I like them to be about three liters, so I use my MSR 3 liter steel pot.

Jim MacDiarmid BPL Member
PostedDec 30, 2009 at 10:58 am

I’ve used a few different ones and settled on the Firelite SUL 1350 (or whatever it is called).

Glad to read that as I just ordered one from the sale for Solo/duo snow melting purposes.

I was leaning toward the AGG 2qt size, but found this thread where Roger Caffin says he uses a 1.5 liter pot for he and his wife, and they cook in the pot, whereas I’m just melting snow and to Mountain Home in the bag style style.

Nick Truax BPL Member
PostedDec 30, 2009 at 8:52 pm

I'm personally a big fan of the MSR titanium 1.5L. It is around 6oz and does the job for me and/or one other person. Could use the 2L for two people as well. Either way, I like this 1.5L pot quite a bit.

PostedJan 1, 2010 at 4:12 pm

A vote for the AGG 2-liter. Mine is the Hard anodized version. Just the size I need for 1 or 2, and my stove fits nicely inside (whisperlite or Simmerlite). In the summer, my canister stove fits in with the canister (large canister).

Viewing 12 posts - 1 through 12 (of 12 total)
Loading...