I have a Nunatak Alpinist on order, with a .8 quantum shell and a 1.0 quantum inner. Tom suggested that this would provide the best balance between lightweight and durability. The 1.0 liner protecting more against thrashing around in a bivy. I like the idea of going with the .8 quantum for the inner as well, but don't want the Alpinist to die a premature death in exchange for a half an ounce. I have common sense and take of my gear, but don't neccesarily baby it. Does anyone have any experience to share with both of these fabrics? I'm particularly interested in the durability … but comments on water resistance, breathability, etc are all useful to me!
Topic
Pertex Quantum .8 vs. Quantum 1.0
Become a member to post in the forums.
- This topic is empty.
I'd probably get what he recommends as he does do it for a living and has the material in front of him.
I have three Nunatak down quilts, including one that was one of the first ever made, shortly behind Don Johnston’s original. One of them was made with the lighter Quantum for both the lining and the shell. I have hundreds of nights in these quilts and I don’t think there are durability issues you need to worry about with the fabric.
The sewing, on the other hand, is another story. I’ve ripped seams on two of them, but was able to repair them. That’s caused by thrashing. To that end, the slightly heavier fabric will hold a seam a “little” better but my two blowouts were at locations that where the needle and thread didn’t appear to catch the full seam allowance. Neither one of these was a big deal, and I lost no meaningful amount of feathers, or sleep, over the mishaps.
Hi Jeff,
Cool.
Hi Ryan,
Thank you for the response. I think I'll stick with my original decision.
Become a member to post in the forums.

