How can you pitch a TarpTent (Rainshadow 2) so that the fly is set directly on the ground eliminating the mesh air gap along the bottom perimeter?
Topic
TarpTent pitching help
Become a member to post in the forums.
- This topic is empty.
move the stakes as close to the tent as you can.
Dig holes under the pole tips, according to Franco. But I bet it becomes a sweat bath.
I had to do this in a blowing rain. It definitely helped reduce spray and condensation wasn't an issue because of the strong winds and even with the sides to the ground, there is still pretty good ventilation from the end vents.
I wouldn't ever do this if there wasn't a strong wind though.
"Dig holes under the pole tips, according to Franco"
That comment was about the Rainbows (and similar single hoop tents) however it should work with the tail hoop too.
At the back the fabric is almost down to the ground anyway, so reducing the height of the front pole/s by a couple of inches will drop that closer to the ground.
Placing the stake closer will help too but somewhat reduce the stability.
(this is how I "see it" cause I don't have one of those…)
BTW, I do these mods in my backyard so that I have plenty of time to fiddle with minor adjustments, like where to position the pegs. Once you get it right it is very easy to replicate, just like riding a bike…
Franco
I wouldn't do it. Cutting off airflow like that will very likely cause condesation to form inside — aka 'interior rain'.
Notice I said "according to Franco". That way I don't get in trouble if something goes wrong!!! Hey, I may have to try that on the wife…….
Become a member to post in the forums.

