anybody use the new Platy soft bottles. Any pros or cons on the bit valve vs regular cap?

Topic
Become a member to post in the forums.
anybody use the new Platy soft bottles. Any pros or cons on the bit valve vs regular cap?

That bite valve looks a lot easier to use than the push/pull caps I have now. That might be worth the extra half ounce.
The actual bottle seems to be pretty much the same as their other bottles but with more of an hourglass shape and the new coloring unless I'm missing something. The weight is the same for the 1L soft bottle and the 1L PlatyBottle.
the concept is great, but I always worry about contamination, dirt, germs etc when the bite valve is open like that. I've owned camelbak better bottles that also have bite valves (that even flip down), but they always got dirty/dusty. Maybe attach some sort of a bite valve cover (like the old neoprene platy ones that are getting harder to find). But then u get into the whole extra weight issue blah blah blah :D
I wondered about the dirt issue too. For the price I am going to order one and give it a try with the bit valve. If it works for EDC then maybe a 2nd one without the valve.
I've been using the same bite valve for 2 years and I aint dead yet!! I do run it through the dishwasher when I get back.
I only use platy for water carry so this new feature would just add weight and price(?). I Use a 16oz bottle (smart water I think) for drinking.
I have a camelback (for day hikes) and the valve does get dirty after a while and needs to be cleaned on regular basis. I usually just use diluted bleach for that.
Interesting idea on the bite valve. Looks like the rest is all ergonomics.
All I've ever done to clean a bite valve is to rinse it off and flush some water through it. Putting one in a dishwasher would do more damage than good– trapping small food particles and the detergent and heat are hard on it.
IMHO there is way to much concern with plain old dirt. You don't want food to accumulate on your cooking gear, but you breath more dust and dirt than you ever swallow. There's far more chance of bacterial contamination from your hands.
My old Platy bottles are still going strong after so many years. I won't replace them until they fall apart and I don't see that happening anytime soon.
Joseph
BTW I have to say Platypus(Cascade Designs) has the very best customer service. They replaced a 2L Hoser and a seperate drink tube kit no questions asked. I have stuck by there products for several years.
"My old Platy bottles are still going strong after so many years. I won't replace them until they fall apart and I don't see that happening anytime soon."
Ditto here.
I have two of the new bottles, and I find them good. They now come with measurement options on the back, which is extremely useful. The new bite valve on the other hand didn't yet grow on me, and I have used the old push/ pull caps which I find more convenient (and lighter). They're the same weight without the caps, and the colours + measurements are a nice touch.
Become a member to post in the forums.