Topic

Ohm

  • This topic is empty.
Viewing 20 posts - 1 through 20 (of 20 total)
Robert Carver BPL Member
PostedDec 13, 2009 at 4:07 pm

I used my Ohm on several trips through the year. Very good pack. But, one thing I've noticed is that the waist straps tend to twist up in the ladder lock buckle. I emailed ULA concerning the problem stating to them that I thought the problem was that 3/4" webbing was used with a 1" buckle. They graciously decided to make me a 1" strap for a price using one of the buckles from the Circuit/Catalyst line. This solved the problem.

Anyone else have the same problem with the 3/4" waist strap?

PostedDec 13, 2009 at 4:12 pm

The waist strap on my Ohm is 1" also. Perhaps they made the change permanently? I didn't make any special requests for this.

Chris

PostedDec 13, 2009 at 5:04 pm

"Anyone else have the same problem with the 3/4" waist strap?"

Yeah, same problem. I "field fixed" it by press fitting a section of a pine twig in the slack space in the webbing between the bar tacking that attaches the webbing to the hip belt wings and the ladder lock buckle. That kept it vertically aligned and prevented binding(twisting) of the waist belt straps. I think the problem could also be solved by bar tacking the webbing right up against the buckle to keep it vertically aligned. No slack, no cocking of the buckle off to the side, no problem. Crude but effective. I just left the twig in place. :)

PostedDec 14, 2009 at 8:38 am

I had the same problem and ULA sent me the replacement 1" straps and buckle. Pretty much fixed the problem with the twisting of the waist belt straps, but I still think the hip belt wings could be better designed to be more comfortable without adding much weight.

Lucas Boyer BPL Member
PostedDec 14, 2009 at 8:47 am

The longer I own my Ohm, the more I think they goofed on the design of the hipbelt. The present design is fine if you put a piece of grosgrain on the hipbelt padded wing like a belt loop on jeans, this would prevent the dang thing from sliding down on to your bare hips thereby negating the padding since the load is carried by that web strap. I haven't asked for a fix, but maybe I should. I think the simple padded hipbelt w/ the webbing attached to the ends of the wings is a perfect KISS design. Not sure why they went w/ this more complex setup. I can't imagine it saved any weight. BTW: I love my Ohm otherwise.

PostedDec 14, 2009 at 4:24 pm

I'm curious if ULA realized there was an issue and fixed it. Like I said, the Ohm I recently purchased came with standard 1" straps and I don't have any issues with the straps twisting. Maybe you could post a picture of the design flaw you are talking about and I could post a picture of the same part on my pack to compare?

Chris

PostedDec 14, 2009 at 4:55 pm

Yeah,

Funny but when I brought this to their attention back in April, I was blown off, with Casey saying well Brian tested this pack with over 500 miles on it, and the design was fine, and maybe it was how I was using the pack? Huh?

Anyway, I stripped the standard 3/4" hip-belt webbing, and sewed on 1.5" webbing with a single center pull buckle. I also moved the hip-belt load stabilizer straps attachment point at the hip-belt, as high as they would go, almost to the top of the hip-belt.I had issues with the adjuster buckles at the pack, where they would slip or slide right off the sides of the hip-belt. No problems with it now.
I guess it took more than a few people complaining before they realized that I was correct, that there is or was a slight design flaw.
My Ohm had the 3/4" wide belt, but I like the 1.5" wide webbing and simple single buckle, much better.

CW BPL Member
PostedDec 14, 2009 at 5:02 pm

My girlfriend and I have both had Ohms for a large part of this year. Both have 3/4" webbing and neither of us have experienced any problems with the belts or wings. We both have fairly small waists (mine is 29-30 and hers is probably 27 or so) so maybe that makes a difference?

Edit: The yellow on mine is 1" and there is no slop in the loops. I thought we were talking about the actually belt webbing.

PostedDec 14, 2009 at 5:14 pm

Like the others have mentioned I found the problem to be with the Yellow Grosgrain webbing loops. There was too much slop in the loops, and the webbing is too soft, and the adjuster buckles would twist.
It would benefit greatly, if it was regular 1" wide nylon webbing, sewn tightly to the buckles. Maybe ULA has already tweaked this area for current models?

Robert Carver BPL Member
PostedDec 14, 2009 at 6:20 pm

Here is a picture of what I'm talking about. The top strap is the 1" replacement strap. It takes up all the space in the ladder lock. The bottom strap is the original 3/4" strap and buckle that came with the pack. It was twisting upon itself within the ladder lock buckle.1" strap vs 3/4" strap.

CW BPL Member
PostedDec 14, 2009 at 6:23 pm

In that case, we have no issues with our Ohms which have the 3/4" webbing belts.

Lucas Boyer BPL Member
PostedDec 15, 2009 at 7:54 am

Just measured my Ohm straps, 3/4". However, mine aren't twisting in the ladderloc. They are just sliding off the padding and rubbing my hips. I don't think this has anything to do w/ waist size. I do think the more padding on your hips the less this problem will annoy you. I have no spare cushion on my hip bones and I usually return from an extended trip w/ at least one hip bruised, scraped, and red. The more I look at this thing, the madder I get. I realized the strap acts as a tensioner for the bottom of the pack and the fastener for the hipbelt, why in the hell couldn't they just keep the 2 functions separate?Ohm Hipbelt

In the photo you will see the strap on the lower edge of the padded hipbelt w/ my dark fleece poking out below it. The strap just keeps riding lower and lower until it falls off the hipbelt pad and there it sits rubbing me the rest of the time, until I reach down readjust and hike some more. I repeat this all day. I think I just convinced myself to get the sewing machine and scissors out!

CW BPL Member
PostedDec 15, 2009 at 8:07 am

I sit around 5% BF so not much cushion on my hips either. Maybe it's a pack weight thing? The most I've carried is about 18 lbs. No issues with the hip belt.

Lucas Boyer BPL Member
PostedDec 15, 2009 at 8:22 am

Chris, I've had the problem with more weight and less weight in the pack. My personal opinion is where you put the belt in relation to the illiac crest. I try to postion the belt over the crest half above and half below. Maybe I need to take some slack out of the shoulder straps to keep the pack from pulling down on the hipbelt? I just try not to hike w/ my shoulder straps snug against my shoulders.

Tom Caldwell BPL Member
PostedDec 15, 2009 at 8:28 am

Would a Circuit belt (minus the velcro and sewed on) work on an Ohm? I asked them if they would do that, and they said NO, so I guess it doesn't matter. There's just no way I could use an Ohm with my 40" waist.

As far as Circuits, I just got one, and I'm not all that crazy about the hipbelt design.

CW BPL Member
PostedDec 15, 2009 at 8:31 am

That's possible. Generally I have 12 lbs or so and it's not a big deal to have some weight on my shoulders. Half the time I undo the belt for long periods to vary the weight location or don't wear it at all.

Lucas Boyer BPL Member
PostedDec 15, 2009 at 2:44 pm

Chris, when I get low on food or get tired of the hipbelt I periodically hike w/ it unfastened too. Of course, those times when you load up for a water haul or start out w/ 10lbs of food, you need that hipbelt to work well.

Tom, I don't think a Circuit style belt would be the answer either. A hipbelt needs to accomplish 2 tasks: Stay on your hips w/ the padding over your hips and fasten securely. It's not a complicated design. Look at MLD's hipbelts, there's nothing to go wrong, short of a seam blowing out.

PostedDec 15, 2009 at 6:59 pm

Lucas, just do my hip-belt mod:

First pop the stitching's and remove the yellow webbing, and the load stabilizer straps too, from the front of the hip-belt only.
Next, sewn on (2pcs) of 1-1/2" wide x 12" long nylon webbing to each end of the hip-belt wings, approx. 1" in from the hip-belt ends.
Last reposition the load stabilizer straps, flush with the top of the hip-belt, sewn on, forming a loop, to attach the hip-belt pockets to.
I did all this free hand, if you have a sewing machine, it would be even easier. You'll need a new 1-1/2" center pull hip-belt buckle too.
This was a big improvement in the hip-belt for me personally.

Lucas Boyer BPL Member
PostedDec 16, 2009 at 8:26 am

You know Michael, I've been ripping on the hipbelt, but it's really not the hipbelt that's the problem. It's the dang load stabilizer strap. I feel like an @ss. I might just try hiking with it loosened and see how it carries that way. I'm not really wanting to cut on the Ohm, in case I decide to sell it.

PostedDec 16, 2009 at 5:54 pm

Yep, I had problems with both, but my mods solved both issues for me. I like to use the load stabilizer straps to pull the pack into my low back, and having them be loose, well they don't function as well, for me anyway. They do function well though, for such a lightweight pack, that can handle a 30lb load.

Viewing 20 posts - 1 through 20 (of 20 total)
Loading...