Topic

Idea: Double Vapor Barrier belay parka.

  • This topic is empty.
Viewing 10 posts - 1 through 10 (of 10 total)
Jim W. BPL Member
PostedDec 10, 2009 at 6:14 am

Cutting to the chase- let's say I have an active clothing system of warm-when-damp wool and fleece. Assume I'm sweaty or maybe it's sleeting and my shell is wet on the outside.

I had this idea of a waterproof belay parka. Waterproof inside, waterproof outside, puffy synthetic insulation in the middle.

Maybe silnylon (or Cuben) inner and outer shell and 3.7 ounce Climashield insulation. Somewhere down low it would have vents so that air could get in/out between the shells for lofting and compression.

It would be used for long rest breaks, around camp, and as an emergency bivy item.

The VB aspect and always dry insulation would make it warmer, the waterproof inner would prevent a wet/damp clothing from soaking the insulation.

Waterproof outer would both be lighter than WPB and prevent sleet from soaking it from the outside.

Since it would be a belay coat it could vent via the chimney effect (no pack straps to block air flow under typical use).

Silnylon would make it cheap and light compared to fancy WPB fabrics.

At night it could be used as part of a VB sleeping system along with a hip-length VB sleep sack.

Am I all wet on this idea?

PostedDec 10, 2009 at 6:25 am

As the insulation is always dry it could just as easily be down. It could be positively inflatable to optimum loft rather than vented, although that would imply a pump sack.

PostedDec 10, 2009 at 9:00 am

I think this could work if you use a vbl close to the skin
layer as well.

I could see the breathable fabric near the bottom hem to let
in air and drain moisture.

Jim W. BPL Member
PostedDec 10, 2009 at 10:19 am

And there I thought my idea was revolutionary… Inflatable down suit!

One downside of inflatable is that it would truly make you the Michelin Man. Stiff and not very drapable. Cuben fiber and 900 fp down would make a very light garment though.

Regarding using a VB close to the skin as well- Certainly if the weather is cold enough to make that work. For sleeping I would just have a baselayer under this parka anyhow. I would probably line the hood with Powerdry for nicer feel.

If I make a prototype it will be silnylon and Climashield or something similar, with very simple (easy to sew) construction. Having only used a VB for sleeping in cold temperatures, I'm not too sure whether I will like it so I don't want to make a big investment.

Tim Marshall BPL Member
PostedDec 10, 2009 at 11:47 am

I have been considering the same thing (with cuben) but haven't had time to make a prototype. I look forward to hearing how it goes.

-Tim

PostedDec 10, 2009 at 12:08 pm

They used to make these in the 70s, one guy I know has a big blue down expedition parka with waterproof fabric inside and out. Really warm garment, might be nice for sitting around camp but for doing stuff the technology has evolved much further.

PostedDec 10, 2009 at 12:41 pm

Jim, I think you are imagining this over inflated. Imagine only inflated enough to allow loft. It would need spare cuben on the outside shell to stop it being stiff. I cannot imagine a base vent waterproof enough to protect down.

Jim W. BPL Member
PostedDec 10, 2009 at 12:50 pm

Mike;
I feel dumb now! I had looked at their website and saw the uninsulated Doublewall, but not the Sililoft. Yup, that's basically what I was thinking. I would make it a bit longer- maybe a long tail with some foam or fleece as a built-in sit pad.

Tim;
I think The Green Pepper pattern 122 "Men's Oregon Jacket", which is designed as a lined, hooded parka with optional insulation may be a good pattern.

Tim Marshall BPL Member
PostedDec 10, 2009 at 9:37 pm

Jim,

122 looks to complicated to me, i'll just use 543 (which i have made wind shirts with before) and make 3 layers, shell, liner and insulation sewing the liner and insulation together then covering with the shell. I like how simple 543 is and even doing it twice i think will be easier for me, plus this is more what i am looking for. A streamlined piece of insulation, not a parka.

-Tim

Viewing 10 posts - 1 through 10 (of 10 total)
Loading...