Yesterday my new Thermarest Trail Pro arrived (bought on ebay), so I decided to leave it overnight to see if there is any leak (I hate leaks). I've inflated it and spent couple of hours on it watching TV, and I noticed that it was a bit softer. I went to bed and this morning it was much softer-it leaked. It didn't leaked completely, I reckon i wouldn't woke up on the ground If I was on the trail but after 8 hours it is noticeably softer.
Is it normal to have such leak? What to do? To contact ebay seller and to risk to pay expensive postage from Australia to USA or to contact Cascade? Will they repair it or replace it? I'm confused..
Topic
Self inflating matress
Become a member to post in the forums.
- This topic is empty.
I would check for leaks by submerging it or using soapy water. I prefer submerging but others swear by the soapy water method. I have tested quite a few ;) If it is new the most likely places to spot a leak would be the edges or the valve. I'm not sure what TR will do but you can always see if the seller is willing to help out.
Hmm….if the leak is so small that you won't wind up bottoming out after 8 hours, then it's going to be very hard to find. I would probably just use it for a while and not do anything about it unless it gets worse.
THATS BS A leak is a leak! If that leak wasn't described in the sale of the item return it for a new one/money back.
I'm with Alex. Try to get the seller to refund you the purchase price and shipping cost. And if seller wants his/her pad back, have him/her pay for return shipping as well.
Failing the above, give the seller a rotten review — then repair the pad yourself. While a slow leak can be hard to find sometimes — repair is usually pretty straightforward.
On the other hand …
It could just be that the air inside the mat cooled over night. This is known to happen, especially in the snow. And this does cause a softening of the mat over night.
Cheers
Warm air of breath going in cools, contracts, resulting in softer pad……maybe. Leave a weight on the inflated pad for 24 hours to see if the loss of firmness bottoms out.
It has been mentioned before. Sometimes Boyle's law is in fact the cause of a "slow leak" However that is not necessarily the case here, but do take that into account.
Franco
http://en.wikipedia.org/wiki/Boyle's_law
Become a member to post in the forums.

