Topic

GWS water resistance

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
PostedDec 3, 2009 at 8:28 pm

I was curious to know what type of water resistance one could expect from a gws bag from western mountaineering, I'm assuming they aren't taping any seams so where exactly could you expect it to excel? I would contact wm about this directly however I can't find any contact info on the website.
Thanks,
Sean

PostedDec 3, 2009 at 8:49 pm

I was looking for contact info the other day too. Couldn't find an email but finally found a phone # under find a dealer. They don't make it easy, not sure why.

(408) 287-8944

Bob Bankhead BPL Member
PostedDec 3, 2009 at 9:56 pm

WM office in San Jose, CA is (408) 287-8944. Their FAX number is (408) 287-8946

These phone numbers are printed on the back of the WM catalogues.

Brad Groves BPL Member
PostedDec 4, 2009 at 7:34 am

Anything short of actually sleeping in the rain should be pretty good. The shells aren't designed or intended to function as a full-on bivy sack. GWS is basically 1st gen GTX, and is nearly waterproof, but with much better breathability than the GTX we now know. I've never had a moisture problem using a GWS/Dryloft bag in winter conditions. It is a bit bulkier and heavier, and a bit less breathable overall than, say, the MF shell, but is also a bit more durable shell. Should work great under a tarp, more wind-resistant, too.

Seems like a lot of questions about taped seams on sleeping bags coming up lately. One of the most important things you can do is keep your insulation dry. I wouldn't ever plan on using my sleeping bag as primary shelter… The GWS bags are basically intended for cold weather, not the rainy season…

Viewing 4 posts - 1 through 4 (of 4 total)
Loading...