Topic

Using Thermarest Prolite 3 on snow

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
Elliott Wolin BPL Member
PostedDec 3, 2009 at 5:00 pm

I've been happily using my 1" thick 13 oz Thermarest Prolite 3 short for years, but never on snow. This summer we likely will be camping on snow in the Pacific Northwest.

Anyone have experience using this pad on snow in the summer? Is it thick enough, should I put something under it, or switch to a thicker pad (e.g. Prolite Plus)?

Jim MacDiarmid BPL Member
PostedDec 3, 2009 at 5:52 pm

According to this thread you need a total R-Value of at least 5 when sleeping on frozen ground to prevent heat loss to the ground.

This thread also discusess R-Values and indicates your Prolite 3 has an R-Value of 2.3.

According to Richard Nisley, in the above linked threads, a standard 1″ CCF has an R-Value of 3.6.

I used a Thermarest Z-Lite (R-Value 2.2) and a 3/8″ blue CCF(R-Value 1.35) last winter on snow and definitely felt heat loss to the ground.

So you will almost certainly want to add something to your Prolite 3.

PostedDec 3, 2009 at 8:12 pm

Below is a photo of what I have been using on snow. An XS prolite (8 oz.), a small ridgerest (9 oz.) and four sections of z-lite (3 oz.). The z-lite is also used as support for the pack. I have tried a small neoair instead but the dropoff with the ridgerest added makes it too uncomfortable IMO. I agree with Jim though that you will need more than just the prolite 3. An advantage of adding a foam pad rather than just a thicker air pad is not only a great r-value but also you can strap it to the outside of your pack saving space. Also, if you are making a longer trip, you can jettison the foam pad if you no longer need it. If you add a thicker air pad you are most likely stuck with it for whole trip.

winter pads

Edit: I agree with Jim N that a ridgerest under a prolite will still barely be enough, especially when not full length. I use a 20' arc alpinist quilt and then wrap my MB down inner jacket around my lower body and hope for the best. The everclear helps too ;)

James Naphas BPL Member
PostedDec 3, 2009 at 8:16 pm

You'll want at least a ridgerest (R 2.6) under the prolite 3. Only problem with this solution is that if you track any snow on top of the ridgerest it will collect in the dips and melt if the temps rise enough. You'd probably be more comfortable with two ridgerests, at that.

FWIW, I've used a ridgerest under a thermarest ultralight (the predecessor of the prolite 3), and it was barely enough.

Jim MacDiarmid BPL Member
PostedDec 4, 2009 at 5:24 am

Also adding, you're going to be bringing a CCF pad for sitting on the snow anyways. So rather than buy an expensive thicker foam pad, get a good foam pad to supplement your Prolite 3. The ridgerest deluxe has an R-Value of 3.1 and weighs 19oz in the 72" length. Sure, that's a 2 lb sleep system, but everything's heavier in winter.

Or, if you want to spend a little more money to be a little lighter, get Ridgrest Deluxe in regular, a Ridgrerest standard in torso length, and have a winter-rated sleep (R-Value 5.7 for the torso portion) system for 27 oz. But you lose the comfort of a air mat. That's why I'm trying to incorporate my NeoAir short into my system. Snow, when it melts and hardens under you, was like sleeping on lumpy granite for me last winter.

PostedDec 4, 2009 at 1:00 pm

In real cold on snow the thermarest pro are cold to touch.
Every time you turn around in your sleeping bag you feel a bit cold.
I solve this by putting the foam pad upon the thermarest.
Rest of the year i prefer the comfort of putting the foam pad below the thermarest,

Roger Caffin BPL Member
PostedDec 4, 2009 at 1:15 pm

> my 1" thick 13 oz Thermarest Prolite 3 short for years, but never on snow.
I doubt that the 1" thickness will be enough. A good 10 mm CCF pad under it might be the trick.

I normally use a 2" Therm-a-Rest (not made any more) on snow, and find it just fine.

Cheers

PostedDec 4, 2009 at 2:13 pm

I agree with the others that the Prolite 3 alone won’t cut it on snow. I own one and find that I lose considerable heat to the ground when air temps near freezing. Some can use it at lower temps, but I use ~30* F as my personal cut-off for that pad, alone.

Below that temp… no amount of insulation above will keep up with the heat loss I feel below. The only solution is to add R-value beneath you, as the others have suggested.

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...