Topic

stove pump “storage tube”

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
PostedNov 29, 2009 at 6:48 pm

Im looking for a threaded tube to screw my stove pump into during transport to prevent residual white gas from dripping into my pack/pot. I envision it to look like a threaded-aluminum-cigar-tube. Any ideas on finding one or fabricating (i love that word) one? Thanks…
~napcop

PostedNov 29, 2009 at 6:53 pm

What kind of stove do you have? And why do you remove the pump from the fuel bottle? I used various MSR white gas stoves for years and never removed the pump except to service the pump or fill the fuel bottle. Never had any dripping at all.

PostedNov 29, 2009 at 7:14 pm

Brunton Lander. Why remove the pump? good question. Honestly, it is easier to carry the fuel (external on pack) with a clip in the cap of the fuel bottle. I have only had this stove a short while, graduating from esbit and a pocket rocket. It just seemed PC to remove the pump. Guess not necessary, eh?

Brad Groves BPL Member
PostedDec 1, 2009 at 8:28 am

As Denis said, just leave the pump in. I never had one leak in at least 15 years using them this way. Additionally, you don't want to hang the fuel bottle from the back (or side) of your pack anyway. You want the heavier, denser things of your load as close to your back as possible. You also don't want something swinging around on your pack. At the very least, stash the fuel bottle in one of the water bottle pockets on the pack, offset by a water bottle on the other side. I tend to carry fuel inside the pack in the upper reaches, next to my back.

Roger Caffin BPL Member
PostedDec 1, 2009 at 12:46 pm

Yep, as others have said, leave the pump in the tank. Pack not too close to any food, but leakage should be close to zero anyhow.

Cheers

Viewing 7 posts - 1 through 7 (of 7 total)
Loading...