I'm looking at the Steripen Adventurer/Traveler/Protector (Read as Steripen Black, Silver, or Olive) for Christmas. Will this model work with the Sigg bottles that I use or will I require an adaptor?
Topic
Steripen Adventurer/Traveler/Protector for Sigg?
Become a member to post in the forums.
- This topic is empty.
You need a wide mouth. The sensors on the steripen have to be immersed in the water, not just the lamp. I use the Nalgene Wide Mouth Cantene. Sigg bottles won't work unless they make a wide mouth. This being BPL, you might want to find a lighter solution anyway so here's your chance. There was a thread recently that talked about this. There might be others as well:
Agree with Jack — a Steripen needs to be matched to a wide-mouth container. And SIGG's are heavy…
" And SIGG's are heavy…"
My Sigg bottles weigh in at 148g each, whereas the ubiquitous Nalgene widemouths that I have are 178-180g.
I have a couple of hydration bladders, but the Steripen FAQ reads: "18. Can I use my SteriPEN in my hydration bladder? SteriPEN is not designed for use in hydration bladders. However, it can treat water before it is added to a hydration bladder or as it is removed."
I think I'll probably scratch the Steripen from the Christmas list and continue to use the ceramic filter and supplement with boiling and Chloride Dioxide for nasty stuff.
5 oz. for a sigg bottle is heavy, just not as heavy as a Nalgene bottle. The Nalgene Cantene is a collapsible that is about 50g. It works fine with the steripen. Heineken cans weren't designed to be used as pots but we do it anyway. I trust what others who are using the product say more than the company. Maybe that is a mistake but I would keep it on your x-mas list if I were you.
Okay, the SteriPEN is off the Christmas list and on a "I want it this soon list", along with some 32 ounce Nalgene Canteens. I'll go with the Traveler for the sleek sliver Sci-fi look. I just looks like I could power up the Battlestar Galactica for a FSL jump with it.
What I already have is several Camelbak 3L bladders. Could one treat 3L of water at a time using the SteriPEN multiple times? For example 3 or 5 consecutive treatments for a 3L bladder?
> My Sigg bottles weigh in at 148g each, whereas the ubiquitous Nalgene
> widemouths that I have are 178-180g.
HEAVY! And obsolete today.
A 1.25 L PET fizzy mineral water bottle weighs about 33 g. They will last, despite rough treatment, for years and neither crack nor leak. That’s all I have been carrying for years.
As to finding a container to use the Steripen in – I just use my cooking pot, as you can see in the BPL review of the Steripen. No extra weight needed.
Cheers
I use the Steripen Journey with my Sigg bottle. You can but a rubber protector for the Sigg bottle. You basically put the Steripen in the Sigg and turn upside down. Worked fine for me. Not sure about the adventurer or traveler.
At the end of the day this is about personal preference. The Sigg/Steripen works well for me when I'm fast packing. I just stop and fill up the Sigg and purify while I hike. I don't need to fuss with getting a pot out, etc. On other trips when I'm hiking slower the Sigg stays at home and might use the aqua mira.
Plenty of great ideas from others, but you need to figure out what works for you.
Brad,
It looks like the Journey and Classic have a gasket which works well with Siggs. The size and weight difference with those and the traveler are significant, but they have an oval shaped sensor housing and appear to lack the gasket. It looks like us Sigg users are out of luck. Perhaps such a high-tech piece of gear like the SteriPEN just isn't compatible with our obsolete Siggs!
"What I already have is several Camelbak 3L bladders. Could one treat 3L of water at a time using the SteriPEN multiple times? For example 3 or 5 consecutive treatments for a 3L bladder?"
No, you can't treat 3 liters at once, only up to 1 liter at a time. If you treated 3 time in a row, you would only end up with water that had been ineffectively treated 3 times in a row.
What you can do is carry a 1 L bladder and transfer the contents after proper treatment to the larger bladder. This also provides a backup in case the larger bladder would fail. Or, as Roger does, use your cookpot to treat smaller batches if you don't want to carry anything extra.
Thanks, Pam!
I certainly would have tried to knock out 3 liters by using 5 treatments. I'll probably follow Roger's lead when I acquire one of these SteriPENS.
"I think I'll probably scratch the Steripen from the Christmas list and continue to use the ceramic filter and supplement with boiling and Chloride Dioxide for nasty stuff."
If you use both ceramic filter and chemicals, then don't waste your money on beaucoup expensive chlorine dioxide! Use household bleach like Chlorox instead (99 cents for a whole gallon!) — just 4-6 drops per quart or liter.
The el cheapo chlorine will easily take care of viruses (if any) and bacteria. Your filter can then block out the big nasties like protozoa (giardia, crypto, etc.) — and remove any lingering chlorine taste.
$15 for that? Are they serious? Hilarious.
Actually, it does appear that you can treat 3L using 6 blasts from the SteriPEN, despite Hydro-Photon not recommending it in the FAQ:
http://www.steripen.com/PDF/A&LBladderP248Revised9408.pdf
http://www.steripen.com/PDF/USMP248-3literbladder.pdf
Of course, I found this on Hydro-Photon's website, and they might be biased.
I don't think the FitsAll works with the smaller Adventurer/Traveler series, but only the Classic and Journey. The shape of the Adventurer/Traveler appears to be an oval instead of round.
Hi Pam
> No, you can't treat 3 liters at once, only up to 1 liter at a time.
Sorry, but I have to disagree with you here. Provided the UV radiation can reach all the water in the container, then 3 treatments at 90 seconds each will have exactly the same effect as one treatment of 270 seconds. What you would have to do to make sure is to stir the Steripen around in the water so the path length is not too great.
Ah – I see from an OP post that Hydro-Photon say it is possible too.
Edit: I had better point out that if the Steripen is just stuck into the neck of an upright 3 L Platy (for instance) and left still, then the water at the bottom of the platy won't get much radiation. That approach may not work. On the other hand, if the Steripen is stirred around in a large 4 L pot for 270 seconds so that all the water gets radiated, then it will work. One has to remember that most of the UV radiation comes out sideways rather then down the length of the tube.
Cheers
Become a member to post in the forums.


