Topic

alcohol stove for small quanties ?

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
PostedNov 15, 2009 at 12:31 pm

I suspect this has been well covered here but hoped I might get some suggestions.

I like to brew quick 8 oz. drink and would prefer a stove that has the pot supports built on and works well with small diameter cups.

I'm not in a hurry when I stop so slow heating is fine and if the stove weighs an few grams more than others that's OK for my use as well. Thanks D.

PostedNov 15, 2009 at 1:29 pm

I use a supercat stove made out of these 3.5oz capacity cans:

http://jwbasecamp.com/Articles/SuperCat/index.html

http://www.mexgrocer.com/2567.html

It works with my 550ml mug and small pots. I used a standard paper hole punch to make the holes. I used the pattern on the site. since the cans are smaller than the one on the site, it had less holes. Its made of steel, so its a tad heavier and rusts, but one lasted my whole AT hike. Pretty quick boil too

Theron Rohr BPL Member
PostedNov 15, 2009 at 5:48 pm

For small boils I don’t think there’s any need to get more complicated than a tealight stove.

If you want an integrated pot stand you could make a “Klasslite” stove.

Dan Yeruski BPL Member
PostedNov 16, 2009 at 12:50 pm

The “Cobalt Blue Soloist” is great for small pots and mugs.

I has a built in potstand made of stainless steel and is easy on fuel. Read the specs listed at the link.

Cobalt Blue Soloist

PostedNov 17, 2009 at 5:34 am

I would recommend the Starlyte stove, which happens to be available in the Store on this site.

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...