I just received my pack from another bpl member. What king of pad do I insert in the back? Do I need to ? Is it just for comfort or does it help with weight distribution? Do I need it if I go over a certain amount of lbs? I have an old cheap blue foam sleeping pad that I will never use again; can I use a doubled up peace of that?
Topic
what pad for GG Mariposa Plus?
Become a member to post in the forums.
- This topic is empty.
I use a MYOG version of the GG Nightlight pad. Details at this link:
The pad does give some rigidity to the back panel, but the stays do most of the work. It comes with a Sitlight pad ($5 from GG), and that is what I use but you could use blue foam as well.
Thanks, I'll try my foam pad for tomorrow's trip.
Could I use my Exped down mat ( #7) since I am bringing it anyway?
You don't need the pad in most situations, but the pack does. I've found that wear is faster, especially around the stays if I don't have a pad inserted.
Some pad choices that I've tried: Thermarest prolite 3/4 length folded in thirds, inflate as desired for stiffness and comfort. Blue Walmart pad: Stuff in a piece that's the right size. My favorite: open cell packing foam about an inch thick. Open cell lets the sweat flow away from your back.
You got your pack second hand so it may not have the new aluminum stay. If you load your pack up to the limit, the aluminum stay does a much better job of keeping the weight on your hips. It's well worth sending the pack to GG for a retrofit.
Therma-rest pad works nicely inside the pack too. Deflate it, roll it up and insert in pack (like a tube pack liner). Stuff everything else in the pack, then inflate the thermarest until the pack is of the desired stiffness. This also allows you to lose the lacing.
Thanks for all the info, I'll try a couple of things tonight and see what feels best. The pack is second hand but new and it has the stays.
Become a member to post in the forums.

