Topic

Scarp 1 Pole Termination Point

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedNov 10, 2009 at 11:02 pm

Just a detail that I noticed. If I am seeing correctly, the Scarp poles terminate in grommets that "float" above the ground. Is this correct?
If so, why couldn't they terminate closer to the corner, near the verex of the corner stabilizers through a small tab with grommet? Kind of academic, but I just don't see why the poles have to be so long. Shorter poles would seem to defeat the "free standing" characteristic of the Scarp. Yes? No?

Hendrik Morkel BPL Member
PostedNov 11, 2009 at 12:55 pm

Yes, they float, that is correct.

One the 2nd part of your question, I let Franco, Henry or any of the other tent experts answer, they're way more qualified then me.

PostedNov 11, 2009 at 2:06 pm

You don't need to be an expert to work that one out. all you need is the Scarp and the extra poles and you will figure it out .
Franco

PostedNov 11, 2009 at 2:59 pm

The poles have to extend past the corner and down toward the ground or they would have to way to tension the corner fabric which, in turn, pulls the inverted-V corner supports outward and prevents collapse (at least without staking).

-H

PostedNov 11, 2009 at 11:41 pm

My Moment crossing pole (singular) is the same. The pole ends insert into a pocket of light, Hypalon-type material that permits the pole to pull out the end point tension cords. But I'd still stake it unless I was pitched on a big flat rock and couldn't stake.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...