Topic

Stripping down a Jam

  • This topic is empty.
Viewing 18 posts - 1 through 18 (of 18 total)
Nate Davis BPL Member
PostedNov 6, 2009 at 4:17 am

Okay, so I've been informed that I can shed about 6 oz by stripping down my Golite Jam2. It's the 3100 CI version, size L.

I haven't started yet because I'm really not sure where to begin. I've stripped down other items, but this is my pack. I don't want to take it too far and wind up regretting something.

One obvious item is the frame. I haven't gone frameless before, but now that I'm in sub-15 lbs territory, I'm sure I'll be fine without one.

I definitely want to hold on to the hipbelt and sternum strap for when I take longer trips. Probably not necessary for an overnight, but worth having regardless.

As far as the rest goes, maybe I could cut down some straps, but I'm concerned that I might wish I hadn't someday when I need to strap a couple things to the side of my pack or something.

Anyway, I'll gladly take any advice. What mods did you do to yours?

Also, as a kind of side note, I want to add a single pocket to the hipbelt. What should I use for materials?

Nate Davis BPL Member
PostedNov 6, 2009 at 7:48 am

Jeff, it's got a small foam pad inside a pocket on the inside of the pack. I've always referred to this as a frame. Maybe it's really just a pad?

David, just checked out the conduit and it looks like a great pack, but according to the stats on the site, if I had a hydration sleeve added to it, it'd be .4 oz heavier than my Jam2 in its current state.

Brad Groves BPL Member
PostedNov 6, 2009 at 7:55 am

Yup, thing in back is a pad. I'd leave it, keeps a tiny bit of insulation under your feet at night and pokey things out of your back.

There's a thread or two on here with lots 'o details about stripping one down, but… Cut off stuff you don't need. What might that be? Hydration sleeve, ice axe loops and keepers, ~6" of webbing on each compression strap, all but about a 3-4" tail on the hipbelt webbing, perhaps some drawcord from the top. If your Jam doesn't already have hipbelt pockets, then I guess you don't need to cut those or the inner pockets off. That oughta get you started, anyway…

Zack Karas BPL Member
PostedNov 6, 2009 at 7:55 am

Here's what I did to my original version Jam:

-removed the foam backpad and sleeve
-removed the hydration sleeve
-removed one ice axe loop
-trimmed all straps so that I have about 3 inches adjustment on waist and shoulder straps and about 4 inches adjustment on compression straps (don't worry about not being able to strap things to the outside on future trips–I can still do this by attaching lengths of shock cord to the side compression straps that hold my tarptent just fine).
-replaced the cord in the extension collar with a lighter version
-removed daisy chains
-removed sternum strap and purchased the whistle version from Gossamer Gear that I can put on when I feel it is needed.

Got the weight down to 17oz (older versions weighed less to start with).

PostedNov 6, 2009 at 8:18 am

"David, just checked out the conduit and it looks like a great pack, but according to the stats on the site, if I had a hydration sleeve added to it, it'd be .4 oz heavier than my Jam2 in its current state."

Nate – there is a thread from ULA indicating that the order pack is defaulted wrong. The pack starts at 17oz.

Nate Davis BPL Member
PostedNov 6, 2009 at 8:37 am

Good to know. Hopefully they'll get that fixed soon because a 4 oz default weight is plenty enough to keep people from ordering.

Still at $100+ I probably won't be ordering one anytime soon. I have plenty of other ways I can lose weight for less money, so I'll go after those first.

Thanks for the tip, though. Definitely something to keep in mind and refer friends to.

-Nate

Dale Wambaugh BPL Member
PostedNov 6, 2009 at 8:45 am

I recently did a major stripping job on a Mont Bell Balance Light 40 and knocked about 25% off the weight. I got a deal on it and was looking for a 35 liter pack for overnight trips with side pockets.

The Mont Bell was about the right size, but if failed the "shake test" — that is shaking the pack and seeing how much stuff dangles in the air. It is a quick easy reality check when buying a pack. This pack has a lid pocket, compression straps, waist belt, ice axe loops, etc.

Removing the lid (and a lot of associated straps and buckles), ice axe loops and waist belt took the pack from 36oz to 26oz in about 5 minutes and the surgery was very clean. The waist belt was a simple web strap and non load bearing and I didn't need the extra capacity of the lid pocket. I don't climb, so the ice axe loops were of no use to me and I can carry trekking poles using the side pockets and compression straps. I could take it farther by removing the hydration sleeve or even the back pad, but I wanted those features more than a really minimal weight.

I've always said that you know you are a craftsman when you start altering or making your own tools and it holds with UL hiking too. It ran against my grain to do surgery on a brand new pack, but it became the pack I wanted.

The only misgivings I have in doing major alterations to stock production packs is that the wrong product is supported. This is a fine point, but I think it does hold that buying gear made using UL principles supports the industry and encourages the development of more UL products. I'm not going to lose any sleep over this one :)

PostedNov 6, 2009 at 9:26 am

"Hopefully they'll get that fixed soon because a 4 oz default weight is plenty enough to keep people from ordering."

Not really – the Conduit is a much better pack ;)

PostedNov 6, 2009 at 9:45 am

On the 2009 Jam (26oz) here's what you can do:

1) Remove the hydration bladder sleeve by turning the pack inside out, cutting a few stitches and the side seams will just unravel. You need to cut the sleeve along the bottom since it's sewn into a critical seam that you don't want to mess with. Weight saved: 1.0oz

2) Trim the straps. The waist straps are far heavier than any others so this is where the real gain lies but trim them all except the roll top strap anyways. Weight saved: 0.5 – 1 oz

3) Removing the inner back pad. This is easy to do but I like keeping the back pad because it doubles as a sit pad (great in rainy weather) and if you use a short sleeping pad this can go under your feet. Weight saved: 1oz

4) If you do remove the back pad and you're sure you never want it, you can cut out the sleeve that holds this pad and probably save another ounce.

5) What's left now is the real hack stuff. You can hack off the hipbelt pockets, sternum strap and even the main pocket on the back if you wish. You can save some real weight here but you're also compromising function. I think hacking off the hipbelt pockets would save 2-3oz, the sternum strap is maybe an ounce and the main back pocket is probably 2-3oz.

If you've got a 2008 or older Jam, most of this is the same. Your Jam will just start out 5-6oz lighter because it doesn't have the hipbelt pockets or the additional padding on the back and inner waist belt.

Nate Davis BPL Member
PostedNov 6, 2009 at 10:01 am

I've got a 2008 Jam, but I'd actually LIKE to have one hipbelt pocket for a map & compass and maybe a knife or camera.

I never considered going without the hydration sleeve before, because I use a hydration bladder with a hose. However, I also use a trash compactor bag pack liner, so maybe this would still work for me?

Zack Karas BPL Member
PostedNov 6, 2009 at 10:06 am

I hate using a bladder with the jam–I much prefer the bladder sleeve that ULA provides as it allows me to put my sleeping pad between the bladder and my back. The Jam puts the bladder between your back and your sleeping pad, which I find uncomfortable and have even been bruised by the hose cap while using my Pinnacle. My system now for using the Jam is to drink from a 1L side bottle and keep the rest of my water in a 2+L platy inside the pack. This also allows me to know exactly how much water I have. To each his own, though.

Nate Davis BPL Member
PostedNov 6, 2009 at 10:08 am

I only just started using a bladder in the last couple of months, and though it does make it more difficult to know how much water you have left, it makes me drink a lot more which in turn keeps me a lot more comfortable. So for me, it makes a lot of sense.

PostedNov 6, 2009 at 10:20 am

>>The Jam puts the bladder between your back and your sleeping pad, which I find uncomfortable…<<

+1

Nate, have you used the Jam (while full of gear) with a bladder? I tried it once…for about 2 minutes. That was all it took for me to realize it's not the way to go.

Nate Davis BPL Member
PostedNov 6, 2009 at 10:25 am

I've done two short trips with full gear and bladder. Didn't have a problem at all. I actually did 16 miles this way last Friday, slept great, then woke up and did a few more.

I've taken the Jam out for 11 nights this year, plus plenty of day hikes, and always found it to be quite comfortable. Even when I had a full sized bear canister stuffed inside it.

PostedNov 6, 2009 at 11:13 am

Well, I guess that's why they say HYOH, YMMV, IME, and all that good stuff. ;-)

Do you use your sleeping pad as a "frame" for your pack?

Nate Davis BPL Member
PostedNov 6, 2009 at 11:20 am

No, and that's probably the difference. I have an Ether Thermo 6 which rolls up to about the size of my sleeping bag. No real need for a frame, I guess. What I haven't tried yet is hiking with my bladder AND with my bear canister. I could see how that could be uncomfortable.

Viewing 18 posts - 1 through 18 (of 18 total)
Loading...