Has anybody tried to cover the handles on their pot with anything? I was thinking that brush on vinyl or something along those lines. I tried to get some shrink tubing on it, but I couldn't get it around the curves.
Topic
Hot handles on snowpeak 700
Become a member to post in the forums.
- This topic is empty.
Silicone tubing like for aquariums. There is a thread on it somewhere on this site.
I wrapped my Firelite 550 handles with 3M glass cloth tape. It insulates well and is flame resistant… I haven't managed to burn them yet on either alcohol or canister stoves.
I took the handles off my Snow Peak mugs. I use a homemade pot cozy (made of Reflectix), and I just take the pot off the stove with my bandana and drop it in the cozy. Easy.
I searched but didn't find anything. I'll see if I can find the thread on that silicon tubing.
I've tried using a bandana and it works ok, but it caught fire today. I figure if I can't keep things from burning up in my own kitchen I'm pushing my luck when it comes to the great outdoors.
That's why I carry a Leatherman Micra with pliers (1.9 oz.) to use as a pot lifter. I'd just as soon have a pot without handles. A bandanna that is mostly holes from burns is not much use.
I use the pliers for a number of other items and use the file blade daily for my ever-splitting fingernails. I do, of course, use the knife blade for cutting things. The extra ounce over something lighter is well worth it to me. YMMV, of course.
I always have a pair of liner gloves and I slip one on when I pick up my pot. Its always been enough for me, though I usually only hold the pot long enough to dump the water into the bag.
Adam
I considered just using pliers, but it's my mug to. The handles do cool off pretty quick though so that may be the way I go anyway. I guess you don't really need handles on a mug now that I think about it.
Here's the silicon tubing thread if anybody stumbles on this thread and needs answers, this thread has them.
Here's the mod that I did with mine. I'm still on my original install with no problems.
Just got back from Petco. with 8 feet of clear line air tubing. I'll post some pics tomorrow of the end result.
I'm more concerned with scorching my lips than fingers with the 700. Any thoughts on insulating the 9'o'clock ( if the handle is 6) area? I've put some duct tape on it but it doesn't help
McMaster Carr is my go to place for things like silicone or just about anything used to build just about anything. Any DIYers who don't know about http://www.mcmaster.com be prepared for Christmas in October. Though you have to pay for your own presents.
>I've tried using a bandana and it works ok, but it caught fire today.
Never had that problem. I mostly use a canister stove, and just turn it off first.
I put one of those silicone bracelets (think LiveStrong – mine is some knock-off) around the top. You can buy them from people like MiniBull if you don't have any laying around.
I've also considered trying the silicone tape in just the area that I drink from but haven't bothered because this solution works pretty well.
Become a member to post in the forums.

