Hey all, I just maimed my Caldera Cone ;)
I bought it to use with my Ti mini solo pot… but I figured… why not also be able to use this with the Heiny can pot I made for fun(wasn't gonna buy another cone). So… I measured where the pot bottom fell when inserted into the cone, and drilled the tiny holes so that titanium stakes could slide through and support the Heiny can.
Anyhow, I didn't post this as a "look what I did", because this is so silly compared to the cool things I see so many of you doing with gear on here… I more or less had a question:
Am I supposed to use one or two esbit tablets in the Gram Cracker to bring water to a boil? I used one tablet… and it just did the 'tiny bubbles' thing to 16 ounces of water after about eight minutes. Water was 205 degrees F. I suppose that is good enough for a freezer bag meal. Esbit tab was gone by 12 or so minutes. Elevation 3000ft. It was windy out, 50 degrees and the water was cool to begin with. Are those poor results? I am used to my Vargo Jet Ti canister, So I am new to esbit and cones…
Thanks!

