Topic

Esbit Source

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedOct 28, 2009 at 4:35 pm

I'm planning on ordering one of the new UST WetFire stoves and give it a spin with esbit instead of the wetfire cubes (seems to be the wise choice since the other thread indicates WetFire can't get water to boil).

So here here is the question: Some people say esbit leaves a gunky build-up on their cookware, others deny this. Is it perhaps a function of varying distance between flame and pot, or windscreen versus no windscreen? OR could it be different manufacturers offering different qualities/chemical mixtures in their esbit tablets? Where do you regular esbit users order your tablets and do you get gunked?

PostedOct 28, 2009 at 4:43 pm

I use esbit, and it leaves a very thin film of residue on my pot (bottom and just a bit on the sides at the bottom). For me it's like a dry film though, not a sticky one. I clean it off by rubbing it on the ground a bit and perhaps wiping it off with a stray leaf or two. No issues.

Hikin’ Jim BPL Member
PostedOct 28, 2009 at 4:49 pm

Esbit does leave gunk, mostly on the stove not on the pot at least in my experience. I buy my Esbit fuel at the local REI, but I imagine that there are 100's of retailers around that sell it. There are other brands as well. Stansport makes small tablets which some find easier to use. I have no idea if all brands are created equal. Good subject for some investigation here? :)

PostedOct 28, 2009 at 6:15 pm

I prefer FireLite fuel tablest over ESBIT because they seem to burn a bit hotter and with less residue.

Just do what I did and order a small carton from this site's store.

Eric
BTW, as I've mentioned before, the base of the Vargo Triad EX alky stove makes a great solid fuel tab stove because you can fit TWO fuel tabs in. Two tabs are necessary to cook faster and you can blow them out and re-use later if you don't need all the fuel. Works great for me, even on week long trips. One tab stoves are really tedious with their lower heat output.

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...