Topic

Hate to ask again…tarp and bivvy setup question

  • This topic is empty.
Viewing 1 post (of 1 total)
PostedOct 27, 2009 at 6:20 pm

I am a proud owner of the Spinntwin and have learned to set it up at the local park! Dog walkers looked fearful as i climbed in and reversed out of the contraption!

I also have a bivvy, Oware, double sized that has a full zipper left to write at about chest height. This zipper connects the 'head end' to the body and separates it with a mesh screen that is intended to be vertical.

To keep the mesh and other material off your face, you are provided three loops, one central and two at approximately 1/3 from either side.

The trick is to rig it in such a way that it stays off my face!

Now the tarp's built in features;

* Loops at each end of the catenary
*Loops along the edges at both the door end and centrally placed

What I have tried and why I don't like it;

Central ridgeline to tie the three bivvy loops to; don't like because it draws the left and right sides towards the center – and with two people this just sits on faces!

A triangular rig with 'string everywhere' pulling at the central ridgeline and using one or more of the loops front or central; don't like coz I really couldnt escape the spiderweb without pulling all sorts down – either at night, moprning or in emergency.

The central loop on the bivvy can comfortably attach to the central ridgeline cord. Thats easy and works.

The $64M question – how can I have the other two loops on the bivvy rise VERTICALLY rather than be pulled towards the center of the bag!

Help!

Viewing 1 post (of 1 total)
Loading...