Topic

Caldera Cones and Caldera Cones

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
PostedOct 26, 2009 at 4:41 pm

I am working on a gas conversion kit for my 550ml TiTri Caldera Cone (done) as well as one for a larger pot.
As Anti Gravity Gear now have a $25 kit with a short cone and the stove,( you choose what pot you want to work with) I took the opportunity to get one as well as a caddy for my TiTri.
I have a cheap 1.3L aluminium pot ($6.95 AU) so that is what I am playing with.
Since I have the two cones I thought of a quick comparison between the two boiling 500ml of water. With the 550ml version I can get a roaring boil with 1/2 oz but cannot do so reliably with the other cone and the 1.3L pot. That seems to confirm the well tuned full cone version.
Having switched to 20 ml (.68fl oz) the smaller pot would come to boil a bit faster (but not always) but would always boil for longer ( around 1 min) The wind was gusting in my backyard so results changed slightly from boil to boil.
Franco
BTW, the new cone has a Ti strip on the inside of the dove tail snap closure. Nice.
The cone fits inside my pot.
The war of the cones
Cone Ti strip

PostedOct 26, 2009 at 4:58 pm

I have their Prototype Ti Cone, that nests inside my MLD 850ml mug. It will work with wood, alcohol or Esbit. You need to use 2 Ti wire stakes for pot support. This Cone size eliminates the need for the plastic caddy, as everything can nest inside the Mug.

PostedOct 26, 2009 at 5:38 pm

Yes, the one on the right (1.3L pot) is the low cost Al alternative. I would prefer the Ti version as well but I wanted the other one to experiment with.
Franco

Viewing 3 posts - 1 through 3 (of 3 total)
Loading...