Topic

Unna Questions for Richard Lyon

  • This topic is empty.
Viewing 8 posts - 1 through 8 (of 8 total)
PostedOct 23, 2009 at 9:13 am

I recently purchased a Hilleberg Unna tent. Although I also purchased the accessory mesh inner tent, I am considering having a zippered mesh panel added to the door of my fabric inner tent and would appreciate it if you could answer some questions concerning how the job was done on your Unna.

-Is the mesh panel mounted outside the fabric
panel with only the fabric being zippered, or
inside with zippers on both panels?
-It appears from the photo on the BG Test site that
the there is no horizontal zipper across the
bottom of the panel that would allow stuffing the
panel into the mesh pocket. Is that correct?
-Are you happy with the modification on your tent?

Thanks in advance. You can PM if you'd like.

Tony

PostedOct 23, 2009 at 9:19 am

Richard please post…I'm thinking about getting an Unna and doing the same thing. Hee hee, read the same review at BGT.

b.gin

Richard Lyon BPL Member
PostedOct 23, 2009 at 3:08 pm

Anthony and Bailey,

I'll look closely at the custom work on the Unna and answer your questions in a day or two. I bought the tent on eBay from Peter Vacco (an occasional BPL contributor) and it was he not I who added the tulle panel. I can say that I really like the tulle for visability and ventilation. It should be obvious from by BGT review that I like the Unna in general.

PostedOct 23, 2009 at 5:14 pm

Thanks Richard. I'm looking forward to your input. I' m trying to formulate some clear instructions before contacting someone -perhaps Rainy Pass Repair -to do the modification.

My plan was to ask that no-seeum netting be used for the mesh panel, as I'm not familiar with tulle fabric other than it's used for bridal veils. Any snagging or durability issues with it?

Thanks again………….Tony Patane

Richard Lyon BPL Member
PostedOct 26, 2009 at 6:04 am

<<-Is the mesh panel mounted outside the fabric
panel with only the fabric being zippered, or
inside with zippers on both panels?>>
Outside the fabric, with only the fabric being zippered

-It appears from the photo on the BG Test site that
the there is no horizontal zipper across the
bottom of the panel that would allow stuffing the
panel into the mesh pocket. Is that correct?
Unfortunately you are correct.

-Are you happy with the modification on your tent?
Definitely yes. I like to be able to see out and the so-called no-see-um at the top is almost opaque. Also, unlike BD the tulle is on the outside so I can zip things up without letting the mosquitoes in.

Rainy Pass has done great work for me, including adding no-see-um windows on two tents (BD Skylight and MontBell Thunderdome). Several others have asked me about the tulle fabric (Rainy Pass had no idea what it was). You might seek out Peter Vacco and see where he got it, as it seems stouter than bridal veil fabric.

Let me know if you have any other questions. I think the Unna is a great tent.

PostedOct 26, 2009 at 11:58 am

Richard,
Thanks for the information. That really helps me out. I've called Rainy Pass about doing the work and will send it out to them. The mesh panel will be a black no-seeum netting. I'm asking them for an oblong panel with a rounded
end and a double slider zipper that goes around the top, the end opposite the tent's large mesh storage pocket and the bottom. This will allow for stuffing the
fabric panel in the mesh pocket when it is fully unzipped. The mesh will be on the outside and will not be zippered. My plan is to use this for the shoulder and winter seasons. I also purchased the new accessory mesh inner tent which I will use for summer bicycle tours. Thanks again!

Tony Patane

Richard Lyon BPL Member
PostedOct 27, 2009 at 7:17 am

Anthony, post a picture after you get it back from Rainy Pass! And thanks for reminding me about the new mesh inner for the Unna, which ought to cool the tent a bit in summer. Cheers, Richard

PostedOct 27, 2009 at 1:01 pm

Richard,
I UPS'ed the tent out today to be delivered on Friday. Rainy Pass said the turn-
around time would be about two weeks. Will post photos of the modification when the tent is returned. Here's my Unna with the mesh insert attached.Unna w/mesh insert attached

Viewing 8 posts - 1 through 8 (of 8 total)
Loading...