Topic

“billy”?

  • This topic is empty.
Viewing 12 posts - 1 through 12 (of 12 total)
PostedOct 21, 2009 at 3:57 pm

No joke! Yes, a bucket on a string is the idea. Would be nice to find a light (perhaps collapsible) one!

Gary Dunckel BPL Member
PostedOct 21, 2009 at 4:16 pm

Seattle Sports makes a collapsible and compact bucket (2.8 oz.). Check REI.

Edit: sp.

Roger Caffin BPL Member
PostedOct 21, 2009 at 4:26 pm

Buy 1.5 L Ti pot.
Add two 1.7 mm holes opposite each other just under the rim.
Bend up wire handle from 1.6 mm Ti welding wire, insert into holes from the outside (so the lid still fits).
Added wt – about 2 g maybe, for the handle.

This has been discussed before here I am sure. Finding the thread … more difficult maybe.

However – thinking laterally – wouldn't most wells in Turkey have a dipper available? Don't know – ask maybe?

Cheers

PostedOct 21, 2009 at 4:52 pm

I would initially assume the same thing in regard to a dipper. But reports are that this is often not the case and that ones needs a billy.

As for searching this site, it is very awkward and I have not had much luck with it. Sometimes one can search google (including the word backpackinglight) and get back to this site though.

PostedOct 21, 2009 at 4:54 pm

How would you suggest using it? Putting a big rock in the bottom? I think it might get all tangled up. I had considered using my 5L Sea to Summit kitchen sink in this manner but am skeptical.

PostedOct 21, 2009 at 4:59 pm

I'd bring a one gallon milk jug with the top cut off, but the handle still on. Put a rock in it!

Roger Caffin BPL Member
PostedOct 21, 2009 at 8:19 pm

A small clean rock at the bottom would help.
Jack's idea of a milk jug is also very good.

Cheers

PostedOct 22, 2009 at 6:37 am

I search this site via google.com

Try something like:

site:backpackinglight.com g spot "well water" +2008

I've found that knowing the year or month or even poster helps tremendously!

Hikin’ Jim BPL Member
PostedOct 22, 2009 at 4:39 pm

site:backpackinglight.com g spot "well water" +2008

Jack, what does the plus sign do?

Buy 1.5 L Ti pot.
Add two 1.7 mm holes opposite each other just under the rim.
Bend up wire handle from 1.6 mm Ti welding wire, insert into holes from the outside (so the lid still fits).
Added wt – about 2 g maybe, for the handle.

Hartley, weren't you already thinking about a 1.5L Ti pot? You could kill two birds with one stone if you use the pot to get water as well as cook. Make sure the handle is on securely!

Also, if you're using a Whisperlite with a wind screen, a billy type pot is a good thing. The integral handles on my Snow Peak pot interfere with the wind screen whereas my old Mirro billy style pot lifts in and out of the wind screen easily by the wire handle (the "bail"). Helpful to bring a pot lifter if you're going to be pouring from the pot although using a bandanna as pot holder can get you by too.

Viewing 12 posts - 1 through 12 (of 12 total)
Loading...