Topic

Wishful thinking

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
Brad Groves BPL Member
PostedOct 20, 2009 at 1:44 pm

As the title suggests, I pretty much know the answer to this question, but I'm hoping that I'm ignorant of some reasonable solution.

I have an "old" Dana/Garuda tent that was improperly stored before it was mine. The fly is super sticky; sticks to itself easily. Coating it with talc powder just doesn't seem like a good idea ;). I suspect that the coating has pulled off in a few spots, the adhesion is so strong, but I'd like to be able to play with the tent (and the fly doesn't look too bad). Has anyone successfully de-tacked a fly before? Or is this thing relegated to permanently unusable status?

PostedOct 20, 2009 at 2:50 pm

A couple of possibilities. First it could be mildew, in this case it should have a musty sort of smell.
Use McNett MiraZime for that.
It it is the PU breaking down (more likely) than first try to wash it down with pure soap and water ( same stuff used for Down bags)
If that does not work try 1 cup of salt,one cup of lemon juice and a gallon of hot water. (provably vinegar will do the same…)
If any of the above by chance (!) work, then re-coat with McNett TentSure.
Franco
The above is a non paid McNett advertisement…

Brad Groves BPL Member
PostedOct 20, 2009 at 3:03 pm

Thanks, Franco!

I'm envisioning an old rag, more so than a brush?

(Don't worry, I'll use McNett SeamGrip if the fly turns out… ;P)

PostedOct 20, 2009 at 3:25 pm

Yes a rag or a sponge.
Franco
(let us know, cause I don't have that problem with silnylon….)

Henry Blake BPL Member
PostedOct 20, 2009 at 3:40 pm

If it doesn't work, it sounds like a perfect project to make a new Cuben fly (or even if it does work).

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...