Topic

Alcohol Stove

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
PostedOct 19, 2009 at 7:16 pm

I havent made one yet but when I get time I'm going too. Are the flames strong enough to stand up to any wind?

Lori P BPL Member
PostedOct 19, 2009 at 7:34 pm

No, you will need a windscreen for your stove. I use one whether there is wind or not. Keeps the heat where it belongs, on your pot.

Be prepared for a lot of not-quite-ideal results when starting out by making your own – I have a lot of aluminum hockey pucks to show for my efforts. The only one of mine that works reliably is the Supercat.

PostedOct 19, 2009 at 8:15 pm

The journey to learing the art of the alcohol stove is quite fun. here's a few tips I'll share with ya' from my own experience with them.

1. Use HEET or Denaturated Alcohol – pretty much anything else either doesn't work or or is dangerous.

2. Start with the easiest and most basic type (IMO): an ordinary Cat Can stove. Then, if you would like more effiecency and fun move on to more challenging types like the tea light stoves or soda can stoves which require more skill.

3. Make sure you are using a sufficient windscreen. My favorite one was made from an aluminum pan (the kind Stoffer's Lasagna comes in). It measures: 13in. X 4.5in. with holes punched near the bottom about 3/4in. away from each other for ventilation. It fits a small variety of pot sizes.

4. Have a working knowledge of how your stove works before heading out into the field with it. Do several tests before using it on a wilderness outing without a backup to ensure you don't have any design flaws.

5. Have fun and consult BPL whenever you have any questions.

Instructions galore and all sorts of articles about the making and use of alcohol stoves can be found all over here at BPL and all over the internet.

Good luck!

cheers =)

PostedOct 19, 2009 at 8:17 pm

Thanks guys, as always a quick and informative response, this site is awesome!

Viewing 5 posts - 1 through 5 (of 5 total)
Loading...