Topic

re-coating silnylon tents

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
PostedOct 7, 2009 at 11:54 am

When I got my new TT Moment Last week I decided to lightly coat the top 1/2 of the tent with my seam sealing mix of GE silicone and odorles mineral spirits.

I figure this will preclude any "through-misting" in a very heavy downpour and add less than an ounce to the weight. Plus I have peace of mind in a hard rain.

Any opinions on my "re-coat" of the Moment?

Jim Colten BPL Member
PostedOct 7, 2009 at 12:21 pm

disclaimer … regarding interior tarptent condensation and silnylon thru misting, I my attitude about that is “meh, it happens”

That said, some folks feel that “thru misting” is really interior condensation being dislodged by large raindrops striking the outside of the fly, not rain penetrating the silnylon.

I have not seen convincing reports of experiments that could determine which it is.

I’m guessing you are thinking of the treatment described at Jim Wood’s Basecamp

If it really is “thru misting” then that treatment should work well at the cost of weight gain of 0.75oz/yd^2 (according to Jim Wood)

If it is interior condensation being dislodged, then that treatment will not help.

Viewing 2 posts - 1 through 2 (of 2 total)
Loading...