Topic

Z-pad and Conduit

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
PostedOct 6, 2009 at 8:08 pm

This may have been covered fully before – maybe not. Will a regular Z-pad fit in the Conduit sleeve? Will a short fit? Finally, how many 'sections' are there on a short Z-pad?

Thanks,

Jeff Jeff BPL Member
PostedOct 6, 2009 at 9:07 pm

I tried to get a short to bend properly in REI, but I couldn't get it to fold up properly. From what I hear, it was designed for use with a 3/4 self inflater.

Jeff Jeff BPL Member
PostedOct 6, 2009 at 9:25 pm

I use an old 3/4 Thermarest Guidelite, it's the predecessor of the 1.5" thick ultalight model, whatever they call it these days.

My 3/4 GG Nightlight is also a little too long, but it's longer than most 3/4 pads. I could cut it down and it would probably work. I've heard good things about the Torsolite in the Conduit, but it's too small for me to sleep on.

Joe Clement BPL Member
PostedOct 6, 2009 at 9:35 pm

I just cut a piece of blue CCF from Wallyworld to fit. I'll have to try an inflatable. Never thought to experiment with a Z-lite or GG pad. And I even bought a z-lite to cut up to fit my son's G4.

PostedOct 7, 2009 at 7:52 am

Thanks Joe – I want pics when you try instead of me spending more cash on something that might not work….;)

PostedOct 7, 2009 at 11:36 am

I cut two sections out of a regular length Z-Rest and it fits fine in my wife's S/M size Conduit. Sometimes I carry the other two sections as a sit pad or to bolster the shoulder width of my Gossamer Gear torso sleeping pad.

PostedOct 7, 2009 at 12:09 pm

Hey Dave,

The Z-lite 3/4 length pad, which is (20"x51") fits in my S/M Conduit just fine. IMO they are too bulky for the slim main body of the Counduit. The 3/4 has 10 sections and folds in the middle creating the frame.
I prefer the GG Nightlite Torso or my BPL Torsolite. They're not only more comfortable to sleep on IMO, but create a nicer frame, are lighter, and take of tons less space than the Z-lite.

PostedOct 7, 2009 at 12:14 pm

I actually had a different opinion on what makes a better frame…I found that the Z Rest formed a sturdier back panel than my GG Nighlight torso pad. The GG pad does take up less room, of course. Comfort-wise, the GG wins for me (under the smallish area it covers) but only just.

Joe Clement BPL Member
PostedOct 7, 2009 at 2:28 pm

Looks like a perfect fit for 2 or 4 panels to me. If anything, the top top corners might have to be trimmed, but I doubt it. I may have to go ahead and cut it. Not the greatest pic, but I tried

–Conduit with Z

Or am I misunderstanding the question? I have the regular, and it's 3" when flipped in half, so you sure couldn't use it all. I'll just be using it for stiffness and padding, and leave it in the pack.

PostedOct 7, 2009 at 3:16 pm

Hey Joe – thanks for the pic. Actually thanks for taking the time to take the pic. Much appreciated (another reason I love these forums).

You have confirmed that it will fit okay in width, but the 3" depth is likely going to be an issue.

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...