Topic

My O2 Rainshield Jacket Doesn’t Completely Close Below Chin

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
Andrew Shapira BPL Member
PostedOct 4, 2009 at 10:22 am

I just received a O2 Rainshield jacket that. It's what I expected, except that it doesn't close completely under the chin, even with the drawstring tied. Specifically, there's a flap over the zipper that runs for the whole length of the jacket, and at the top of the zipper, just below the chin, this flap has a few inches that hang out instead of closing up nicely.

It seems as though this could let a lot of water in. Is this normal?

PostedOct 4, 2009 at 11:35 am

It's normal for this kind of cheap construction, yes. They are not designed for full on monsoon conditions.

Andrew Shapira BPL Member
PostedOct 4, 2009 at 11:46 am

Oh. Thanks. Then what is it designed for?

I have always used hard shell and am going to experiment with soft shell. I ordered a Patagonia Ascensionist jacket. The idea was that the Ascensionist would be fine in light rain, and for heavier rain I'd use something else, or in addition. I encounter heavy rain on maybe 5% of trips in my year-round hiking and snowshoeing here in the Pacific Northwest. The plan was to put the O2 Rainshield jacket over the Ascensionist. If the O2 rainshield is not good for that, then I'm not sure how to plan for heavy rain.

PostedOct 4, 2009 at 12:04 pm

"Then what is it designed for"

Cycling, golfing, fishing etc…light use only. You will find that, aside from chin protection, the lack of a re-inforced peaked hood, non-seam sealed zipper etc…will not make it ideal in multi day heavy rain.

I have a modified one where I salvaged the fabric from the stuff sack to a) increase and re inforce the hood peak, b) lengthen the hem, c) Add some chin protection, and d) I seam-sealed the zipper seam.

If you are not handy with a sewing machine then you may need a "better" rainjacket!

Andrew Shapira BPL Member
PostedOct 4, 2009 at 12:32 pm

I'd be taking this jacket on strenuous day hikes, to be used when the rain is too much for the Ascensionist. My trips are a mix of on-trail, off-trail, scrambling, and snowshoeing. About half my trips are snowshoes. I go out about 50 days a year.

I got the jacket because at under 6 ounces it's quite light, it's said to breathe really well, and it's cheap. If I rip it, fine. If it doesn't do what I bought it for, that is a problem.

Your mods sound great. Too bad I am not handy at all with a sewing machine. The chin protection is the mod that I'd really like to have. Seam sealing the zipper seam would be really nice.

PostedOct 4, 2009 at 12:38 pm

You can seam seal the zipper with any standard seam sealer, and tears are easily repaired with good duct tape. The lack of cover near the chin area is harder to fix without some sewing skills. Maybe a girlfriend, mother or friend could help? It is very nice material, light and breathable, but not designed for backcountry use. Maybe you could make a "neck muff" out of the stuff sack?

Andrew Shapira BPL Member
PostedOct 4, 2009 at 11:51 pm

For now, I'll just use it as is, and see how it does when it's put to the test. If there's leaking at the chin or seams then maybe I'd revisit the mods. How much did your mods add to the weight?

Does it harm the jacket to store it for a long period in its stuff sack?

PostedOct 5, 2009 at 11:52 am

No harm storing it in its stuff sack long term. Not sure how much the mods added as I can't remember what it weighed before I modded it. Maybe adds an ounce unless, like me, you also lengthen the hem. That adds the weight of the stuff sack.

Ross Bleakney BPL Member
PostedOct 5, 2009 at 5:06 pm

I have a Propore jacket and I've had it in torrential downpours — the type of rain that we rarely encounter in the Northwest. I didn't have a problem with that part of the jacket (or any part of the jacket). I'm not sure, though, if my jacket is O2, Rainshield, or what (I've bought several and I just don't remember what I own anymore). In general though, I would be surprised if this failed in the area you mentioned. The biggest problem (as has been mentioned repeatedly) is the fragility of the fabric (keep away from trees, brush, etc.).

PostedOct 5, 2009 at 5:57 pm

I find it's not the torrential downpours that are the problem with the O2 jacket, it's the wind-driven rain that gets you wet if it's coming from the front.

Andrew Shapira BPL Member
PostedOct 5, 2009 at 7:04 pm

Rain coming in from the front is exactly what the problem is going to be with the flap that doesn't close. There is simply an area that is not covered by the jacket, where rain can get in easily.

I have been tempted to duct tape this part shut. The problem with that is that this hinders temperature regulation because one cannot open the jacket up nearly as far. It also increases the difficulty of using the zipper.

There's nothing inherent in the material that requires that the jacket have this defect. It just seems to be made that way. Maybe they'll fix it in future versions.

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...