Topic

1.5oz Cuben

  • This topic is empty.
Viewing 11 posts - 1 through 11 (of 11 total)
PostedOct 3, 2009 at 8:13 am

Thinking about using this for the bathtub zip-out floor in the mid I'm starting on.. Any reason why this wouldn't be perfect for that app?

Anybody know where to get this in small quantities?

Can I get it from the manufacturer?

I need only like 4-6y2

Tim Marshall BPL Member
PostedOct 4, 2009 at 4:21 am

seems wasteful to me. Silnylon is near the same weight at around 1.3-1.4oz yd2 and has proven itself on shelter floors. Yeah the cuben will be tough enough but that is a huge cost increase for no weight gain over a proven fabric (sil) that is much much cheaper.

My thoughts.

-Tim

PostedOct 4, 2009 at 6:09 pm

Just thought that stuff would be pretty much bulletproof from the descriptions I've read about it.

I want to make one extremely durable/waterproof bathtub floor, that can withstand the wear my full grown great dane will likely inflict.

Although it is definitely costly..

Do you not think the durability factor would be much higher than silnylon? The price performance ratio is probably really skewed, but then again, that's the impression I get about the Cuben, regardless of which weight/application used.

Tim Marshall BPL Member
PostedOct 4, 2009 at 9:50 pm

if i was using it with my dog i may consider using a 1.9oz nylon floor (sil or PU), but if i know it might get beat up i wouldn't put the kinda money into it that CUBEN will require.

Money is the biggest factor in my gear so it may not be the same for you, i am poor.

-Tim

PostedOct 5, 2009 at 6:52 am

Considering that Cuben is designed for use in the Air, I consider it great for shelters, OK for packs, and beyond design parameters for the ground.

With care I'm sure one could get by and save some weight. But all it takes is one flake of granite, or a dry fir needle, and you'll be searching for a leak.

IMHO.

PostedOct 5, 2009 at 10:25 am

Yeah, what I'm looking for is the opposite of "with care" for this floor.

I'm trying to keep the weight down, but make it as indestructible as possible. The rest of the tent likely wont be, but I'm concerned about the floor with my dog, he's just not as conscientious as a human, by no fault of his own.

I'd go floor-less, but that's not an option for my lady, and it kinda sucks in certain weather anyway.

So what's the best weight/durability ratio'd kit for this application? Yeah cost is something of an issue for sure, I'm pretty poor myself, but if I something is worlds beyond a cheaper option, I'll save..

The 1.9oz nylon? I know people use it, just the stuff that I've seen doesn't seem that super strong/puncture resistant. Maybe that's just an illusion based on the tactile feel of the stuff.

Anyway, really appreciate all the feed-back on this one. I'm definitely still learning.

PostedOct 5, 2009 at 5:18 pm

So you are traveling with your dog and your lady and looking to lighten the load? Have you thought about leaving one behind? Perhaps the one less grounded? :-)

PostedOct 5, 2009 at 7:01 pm

Don't put thoughts in my head that will only get me in more trouble, than building all my gear to make everyone happy will… :P

Just the mention of buying a single person Clark Jungle Hammock got me in trouble for at-least a day.

PostedOct 12, 2009 at 11:41 pm

i say get the dog a pack and make him carry his own floor or shelter :)
i am always thinking about getting a dog to carry some gear and keep me company (sp?)

Lucas Boyer BPL Member
PostedOct 13, 2009 at 11:02 am

My 2 40+ lb dogs have put the floor of my Sierra Designs tent through hell. It's listed as 70d silnylon, which I believe is 1.9(correct me if I'm wrong). If it were going to tear from the dog's paws, it would have long ago. I agree w/ Tim. Save the money and if it tears or punctures sew/glue a patch on there and keep going. I'd use my dog more for packing gear, but by the time I pack enough of his food in his pack, there isn't much room left.

Viewing 11 posts - 1 through 11 (of 11 total)
Loading...