Topic

How to clean clogged jets on pressurized alcohol stoves?

  • This topic is empty.
Viewing 6 posts - 1 through 6 (of 6 total)
Zack Karas BPL Member
PostedSep 27, 2009 at 9:42 am

I have an older brasslite pressurized alcohol stove that I was going to give to a friend, but I seem to remember that a few of the jets have become clogged. I assume the clogging is from impurities/additives of the denatured alcohol used? Anyway, any recommendations on how to de-clog the jets?

PostedSep 27, 2009 at 10:46 am

My jets usually get clogged with the food dye that I put in my fuel. Depending on the size of your jets, you could try to manually unclog it with a needle or a guitar string. Afterward, you could rinse it out with hot water and let dry. That is the procedure that I usually use to clean out my Trangia.

PostedSep 27, 2009 at 1:00 pm

I put one drop so that it changes it from clear to green. That way, it's easier for me to distinguish the fuel level. I have many bottles of fuel at home used for testing stoves and by coloring them, I know that they're fuel and not rubbing alcohol or something.

Konrad . BPL Member
PostedSep 27, 2009 at 1:21 pm

also good for seeing alcohol spills and avoiding wildfires in your cooking/test areas :)

PostedSep 27, 2009 at 1:42 pm

I've never had to clean the jets on a stove before. However, I do have to clean the holes on my Carlisle bench burner regularly with this tool:

Viewing 6 posts - 1 through 6 (of 6 total)
Loading...